Post your current temps

[Al_Capown]

I'm running hardware monitor which came with my nf7-s. Everything except video is running stock and temps are:
System 1-24c
CPU -30c

[danball1976]

Here's mine:

[Enverex]

ech, farienheight.....

heh, MBM is wrong, it says Degrees Farienheight, but there is no such thing.

Anyway,

My machine...
49 'c Proc
35'c Mobo

Server -
54'c Proc
55'c Mobo

Keep in mind that it is about 35'c outside and even hotter in here. Its hard to breath.....

NS

[mmonnin]

33C board
42C CPU

[reelbigfish]

right now it's cloudy and raining so the ambient temps are around 20C. My CPU is running at 55C full load and northbridge at 52C. Well, atleast that is what motherboard monitor says. Ok, something must be broken because it's 55 at idle as well, and the HSF is not that hot. I dunno about the temp sensors on my A7N8X. My P4 is running at 44 idle, 52 full load. The P4 can get up to 59 when it's really hot in here, but its just bad case cooling and high ambient.

[Spinner]

CPU 70C
SYSTEM 39C

Don't even start people! it's a hot day, and I prefer peace and quiet over that of low temps. I have the power, to get those temps down considerably, as my case is armed to the teeth with highpowered fans, and my CPU fan is only running at about 1800rpm, but like I said, I like peace and quiet.

[TheLostSwede]

Its hotter than hell in here :/

Full load since about 4 months back. Gromacs.

Here is a good converter from C to F or F to C:
http://www.ocshoot.no/temperatur.htm

FYI NS, there is an option on MBM to remove the degree symbol.

[TheBaron]

using the ABIT winbond hardware doctor

system 30 degrees
ambient is approx 24
and cpu is at 56 load

now your first question might be: "well then why the hell are you folding" and my answer is that the temp is within tolerance, if it ever gets to 65 it'll shut down, and i think its either because the p4 shim or the slk-900 are concave.

[paroxym]

Temps? sure...

CPU: 39c - Full Load/Folding
Ambient: 28c

Taken using MBM5 through Coolmon.
That's an XP1700 @ 2300 (11.5 x 200) cooled by an sk-7/Tt Smart Fan II on the medium setting

[Souriat]

CPU 66ºC (full load but only for about 20 mins on an Athlon 1800+ stock speeds)
System 40ºC

Damn heatwaves.. need better cooling :)

[DanG]

cpu is running about 44°C in my 35° appartment @ full load on F@H
Case is usually around 38°

the system is watercooled, but needs to be refilled and have the low flow fans changed to some higher flow ones to move more air through the rad

[GHoosdum]

CPU: 45C full load, Folding Gromacs
Mobo: 38C (no A/C, Argh!)

[SimGuy]

Temps take in Asus BIOS:

Room Temp -> 25°C
Case Temp -> 26°C
P4 2266 @ 2907 Idle -> 31°C
P4 2266 @ 2907 Full Load -> 37°C

Gotta love the power of the 92mm Tornado, a SLK-900U & AS3. :D

[leishi85]

here is mine, this is without AC on, so with AC on, the temps will be a lot lower.

[profdlp]

T-Bird 1200 @ 1333:

CPU - 48
MB - 33

The CPU has risen 3-4 degrees in the last month. Time to clean out the dust (http://www.short-media.com/forum/showthread.php?s=&threadid=1242&highlight=dust) .

(Inside in AC)


Prof

[Gargoyle]

I'm glad Al_Capown started the thread! Had I not started up the USDM (EPoX's system monitor, just to be different :bigggrin: ), I wouldn't have noticed that I had turned off my folding!

So, these are my temps without folding being on: (as you can see, my CPU is at +0.25 volts and my RAM is at +0.1 volts)

[seversphere]

64 C load for my Tbred 1700 oced to 2.4ghz @ 1.95vcore
Folding 24/7 in 82 F room

most other rigs are high 50s cause I don't use case fans - just leave side panel off in 72 F room (work)

[empty]

this is idle full load is ussualy 40c

[hypermood]

XP 2500 @ 2188 folding 24/7
Room temp 27C

[muddocktor]

My Barton 2500 @ 2337 is presently running at 44 C die temp, 38 C on in-socket temp and a board temp of 18 C on my A7N8X-Dlx, folding of course.

[TheBaron]

wait how do you read CPU Ext and CPU Die ... I guess my real question is whats the difference (looking at hypermood's post)

[muddocktor]

I'm using MBM to read both temps, which Anus Probe won't do.:D

It looks to be around 8-12 C difference in temp when folding and only around 2 C difference when the proc is idle(which is very rare, in my case).

[Spinner]

TheBaron said
wait how do you read CPU Ext and CPU Die ... I guess my real question is whats the difference (looking at hypermood's post)

The difference is, I am presuming, the 'die' reading is for the internal temp sensor of the CPU, and the 'ext' is the temp sensor on the motherboard just below the CPU. Some motherboards, especially older ones, don't have the ability to read the internal sensor on modern CPU's, but if your motherboard is capable, then any half descent application like motherboard monitor should be able to read it.

[Sputnik]

hey mudd, i'm liking those temps... they're making me mighty happy.
Just got a SLK800 from a friend which he lapped really well and haven't pushed the chip much at all

2174MHz (12x180)
40* full load (motherboard monitor)
27* case temp
23* ambient

[Gareth]

Here is mine. Quite cool today.

[seversphere]

seversphere said
64 C load for my Tbred 1700 oced to 2.4ghz @ 1.95vcore
Folding 24/7 in 82 F room

changed to Barton xp2500 @ 2292mhz 1.89vcore (12.5X183) with same SLK800 and TT2 fan on full with Shin Etsu X23-7768D thermal paste.

[Thrax]

22*C ambient/36*F chip. 2.32GHz, 1.7v. It's fscking COLD here today, and we haven't turned heat on.

[Gobbles]

Ambient 22c
Load cpu: 42c
Idle cpu:38c

1gig duron

[Templar]

The 3.2 P4 HT machine with 2 FAH instances. Hot, eh? :)

Sensor 1 is case ambient. Sensor 2 is the CPU and I have no idea what Sensor 3 is (D875PBZ board from MicronPC)

My main rig runs at about 45C (CPU) and 28C (Ambient) at full load. About 40C idle.

[Armo]

In Armo land we use teh F

p4 1.7 willie style, MCX-462 with 423 conversion kit, 80mm delta

CPU 91.4F
Mobo 78.8F

[Armo]

OMG AS I STOP YTE ANOTHER CONVERSATION IN ITS TRACKS! =\ this is discouraging

[tycho]

49C full load

axp 2500+ @2.1 GHz using the stock heatsink

i got ya armegeddon, ill keep it going ;-)

[danball1976]

Here's mine. CE has gone and turned the AC off in the dorms

[TBonZ]

xp@1680
http://members.rogers.com/tbonz/tman.jpg

xp@1682
http://members.rogers.com/tbonz/depot.jpg

xp@1727
http://members.rogers.com/tbonz/martin.jpg

xp@1737
http://members.rogers.com/tbonz/terry.jpg

[Sputnik]

Barton 2500+ @ 2126 (12x176)
System 23*
Core 36*
SLK-800a topped by a thermaltake Smartfan 2 @ near full speed (4500 RPM)


system not completeley stable at any higher i'm thinking memory isn't stable enough.... gonna get a little help with a stable higher overclock

[RWB]

Pentium 4 2.4B @ 2.9GHz(161*18) 1.65v / Swiftech MCX4000-B w/ Y S Tech TMD Magnetic Drive Fan @ 10K RPM's / ABIT IS7 Motherboard / x2 Kingston HyperX 2/5/2/2 / x1 Maxtor 40GB Liquid Bearing ATA133 8ms HDD's / Abit Siluro Ti4600 @ 320/700 / TTGI 520W PSU Model TT-520SS Triple Smart Fans / Lite-On DVD 16x48 & Lite-On CDRW 40x12x48 / TEAC FDD / Windows 2000 Pro SP4

This is not very good temps, thing is, I have no idea how it is so hot with my HSF that I have and Arctic Silver Ceramique.

BTW that AS Cermamque is dangerous with P4's the CPU CLINGS to the HS as if it were glued, I wound up ripping my CPU out of the ZIF Slocket when I tried removing it the other day!!!!!!! Scared the hell out of me, and makes me wander how I am gonna take the HSF off next time without fear of pulling the pins off the CPU.

[TheBaron]

i've got an IS7 just like you, and i've got temps that are just as bad. if you read the ABIT forums, apparently they do some kind of modification on the read #'s, so they say subtract 10-15 degrees from what you see. now on the other hand, some people dont have crazy #'s like these.

my slk-900 w/ 2.8c, non-OC'd runs at 53.5 load, if that gives you any indication.

also, i've had the same problem with clingy thermal paste, ive ripped the cpu out of the socket 3 times! i'm surprised it still works..

[RWB]

I do 48C Idle... or at least that is what I am at ATM without F@H running. I am heading to Abit forums now to check out what you speak of :) Thanks!