PDA

View Full Version : NF7-S temp ?


fatcat
5 Jun 2004, 3:13am
ok...bios 23, vcore set to 1.850v in bios.

but..mbm reads 1.79v, nVidia system utility says 1.85v, and cpu-z says 1.792v

any know which is correct?

TIA

Spinner
5 Jun 2004, 5:16am
ok...bios 23, vcore set to 1.850v in bios.

but..mbm reads 1.79v, nVidia system utility says 1.85v, and cpu-z says 1.792v

any know which is correct?

TIA
NF7-S temp?

I would trust the Nvidia system utility myself, but then... you could go with the majority, or better yet, the BIOS readings. It does show that read out in the PC Health Status area doesn't it?

Cheers

mmonnin
5 Jun 2004, 2:29pm
If you have a multimeter, one of the MOSFETS should be able to tell. I dont know which one and which wire tho.

fatcat
6 Jun 2004, 12:59am
NF7-S temp?

I would trust the Nvidia system utility myself, but then... you could go with the majority, or better yet, the BIOS readings. It does show that read out in the PC Health Status area doesn't it?

Cheers

;D opps...yea i mean vcore...not temps...anyone feel free to change it. I will check the pc health in bios next system boot(every 15-20 days) I dont have a multimeter, but was just wondering if anyone else notice undervolting on the nf7 vcore

tia

MJO
6 Jun 2004, 1:30am
The NF7-S usually undervolts around 0.03V, not 0.06V as in your case.

My Vcore is set to 1.85V, but it is hovering at around 1.82V

What PSU are you using?

fatcat
6 Jun 2004, 2:40am
The NF7-S usually undervolts around 0.03V, not 0.06V as in your case.

My Vcore is set to 1.85V, but it is hovering at around 1.82V

What PSU are you using?

Antec 430w True

Whats it powering...
AMD 2370mhz
ATI 8500
Rocketraid 404
DVD-RW
120GB HD
40GB HD
40GB HD
2x120mm Fans
3x80mm Fans
Floppy

muddocktor
6 Jun 2004, 3:28am
Mine undervolts about like MJO's board, around .025-.03v. I go with MBM and cpu-z on my NF7-S.

mmonnin
6 Jun 2004, 3:50am
Mine does a little bit as well.