are my volt's ok?

[dancer]

Hi.
I have a 470w Topower PSU, and too many hdd's etc.
I have attatched a pic of my volts, just making sure that they are ok.
And if not, what would be the best psu for me.
Possibly looking at the
Antec 550 Truepower.

Thanks.
http://218.214.47.99/volts.jpg

[mmonnin]

They are within tolerance but on the low side. The Antec you mentioned is a great Power Supply.

[dancer]

Sometimes when i try to print some disks on my canon i865 printer it'l just hang the system.
So i was thinking it could be the psu.
6 Sata hdd's, 4 Optical devices, Floppy, Usb mouse, K/b, printer, card reader, couple of external usb hdd's, internally powered watercooler, Gfx5900xt, P4 2.4c @3.12
Plus i might want to add more.
The otheroption i was thinking about would be to mod a case with 2 psu's.

[mmonnin]

All those HDDs are lowering your 12V line. Man thats a lot of stuff.

[dancer]

592gb hdd. (2x36g Raptors, 2x120g sata maxtors, 1x 120g sata seagate, 1x 160gb sata seagate.)
2 dvdburners, 1 dvd-rom, 1 cd-rw.

[dancer]

well i went and got that antec 550w'er.
Much better now.
Also changed to 2x200gb seagate sata's instead of 120+160.
Thanks.
http://203.122.204.135/volts2.jpg

[mmonnin]

Your 3.3V Rail is much better now.

[radar]

hey i am new to this but where are you making these graphs from?

[dancer]

i'm using Motherboard Monitor to monitor my vols and temps, then just doing a Prt Scr and copy the clipboard to MS Paint, then edit out the rest of the desktop.

[radar]

where can i get the mother board monitor?

[mmonnin]

On the short-media downloads section:
http://www.short-media.com/download.php?dc=47

[radar]

I downloaded the file and ran it but it just brings up the command prompt and then closes it... i am running windows 2000 server...