PDA

View Full Version : start-up issue


briceb
25 Apr 2007, 12:07am
I just built a new computer and i got it to start up but the screen is blank. when the computer turns on it beeps and one of my motherboards on-board led indicators will come on. The guide says it is a memory issue. I have checked every wire and tried installing the memory very firmly and in different slots and I still get the beep when it starts up. I have also checked the video card to make sure it was properly installed.

Thrax
25 Apr 2007, 12:45am
Take everything out of the case. Put the motherboard on a piece of cardboard, use one stick of RAM, no drives of any kind, and the video card. See what happens. Start adding components one by one, then put it back into the computer's case if it all works.

mmonnin
25 Apr 2007, 6:40am
And test your memory with Memtest:
http://www.short-media.com/articles/diagnose_with_memtest86