My OC results - XP 2100+

[W00pAss]

I'm posting these results for discussion, they seem "out of line" with current thinking (Or did I get a "dream CPU"?).

System: Abit KD-7E M0b0

Memory: 512mb 2700 DDR (333mhz rated).

CPU: AMD Thoroughbred 2100+ XP (It may be the "B" core, but I'm not sure right now, will have to check that)

Now for the cool part I have been able to get this baby to run stable at 2.145Ghz! I am running at 15x multiplier, .75v additional on the core and .5v on the memory (with heat sinks and a fan) I have also bumped the FSB up to 143. When it boots up the BIOS reports it as a Thoroughbred 2600!

I am playing some more, but cannot get it above 2.1Ghz yet without stability problems...

[citrixmeta]

nice!!

what heatsink and fan are you using?
why type (brand) of ram is it?

[Nebulous]

Not too shabby. I've had my Tbred b's 2.4, 2.5,2.6 and even close to 2.7Ghz, but then i'm a powerfreak :D

2.1Ghz is a nice oc. We'll need some better info on your setup.

[LiLbRo]

i ran my 650 duron at 1.1 for like a year wiht no problems at all.. then i got a new proc :D

[stoopid]

What voltage are you running at?? I think you meant .075v NOT .75v ... ???

That's a good overclock on air. People like nebulous get much higher with watercooling and other high-end cooling solutions...

[fatcat]

um...

drop the multi to 13x, change the FSB to 167, change divider to 5:2:1 in bios, then start overclocking the FSB upward

u have DDR333 mem and a KT333 mobo so no need to run anything below 167 FSB...unless u got a locked proc

400mhz is a nice O/C to begin with, dont forget to adjust vcore and vdimm accordingly

[W00pAss]

Memory: Kingston KVR333 PC2700 333mhz DDR ram

Fan: Vantec Aeroflow 5600 rpm fan with copper core and Artic Silver.

Abit KD7 MOBO (This baby ROCKS! I can do 1.95v on the CPU from BIOS!)

Video Card is a GeForce2 MX200 32mb (pretty vanilla...)

That's about it...