PDA

View Full Version : Benchmarking teh Athlon 64


Zuntar
13 Aug 2004, 12:38pm
I have been overclocking, and running some benchies. I have come to some road blocks, and need to see what you guys think and PLEASE offer you advice.

System Specs are in my sig. :cool: There are several important details that you must know.....

1. My new rig currently lives in the garage (unairconditioned) while I finish my bonus room. I'm doin this myself so im spending alot of time workin on the room ,but almost done.
2. I think my biggest battle so far is my Graphics card. It tends to wigg out on me, locking up and such. I can push the cpu/mem quite far as long as i don't bench the graphics card.
3. My mem cycle time (Tras) is now set 10.

Heres some of the results..

AquaMark score = 48256 (CPU:10023, GFX:6354)
3DMark 2001SE = 18083
3DMark 2003 = 5614

citrixmeta
13 Aug 2004, 01:32pm
whats ur vdimm at?

Zuntar
13 Aug 2004, 02:16pm
2.7v, why?

Muskin specs for these modules is 2.6V to 2.8V, but othe website under mainboard qualification they state " Black level modules may require DDR voltage of 2.8v". It does not state anywere whether or not my mem is black level.
here is there bench (http://www.mushkin.com/isroot/Mushkin/images/k8n_4000_buffered.bmp) for the 256Mb x 2 modules @ 227Mhz FSB

citrixmeta
13 Aug 2004, 02:21pm
INCREEAASSEEE!!! :D

you must have a nice chip (memory) there if you hit 228@2.7v

Zuntar
13 Aug 2004, 02:26pm
I was editing when you last posted citrix, does that help?

citrixmeta
13 Aug 2004, 02:31pm
nono, you got great mem there, you need to bring up ur vdimm, ur safe until 3.3v.

Zuntar
13 Aug 2004, 02:37pm
Actualy, the sandra score for the mem bandwidth was done at like...... 243 FSB 7X multiplier, 3x hyperthreading @ 2.7 volts. My norm is 10x multiplier, 4x hyperthreading.

Zuntar
16 Aug 2004, 02:36pm
Well, my mobo only goes to 2.85V. :confused: I have more questions about OCing but i'll post that to the OC section.

GnomeWizardd
29 Aug 2004, 01:55am
if u need to get ahold of me on AIM or msn send me a pm for a time

Zuntar
30 Aug 2004, 05:55pm
Thanks chief, been busy, but i'll get there soon, I hope.