I have one of these waiting for me at the house. It arrived today, and now I have to wait another whole week before i come in from the rig to play with it.

I plan to test mine against the original TRUE I already own and if it fits inside the case I just built my latest water loop in, I would like to test it's cooling prowness against it also. The loop I plan to test against is running a Q6600 at 3.6 and consists of a Danger Den MC-TDX block, a Swiftech MC355 pump with an XSPC top, a Swiftech MCR220-QP Res radiator and 1/2" silver Tygon tubing, with the radiator mounted on a Swiftech Radbox on the back of the case. The case this is mounted in is a Silverstone TJ-06B, which might give me mounting problems though. It mounts the board upside down and depending on socket placement, can give interference with the bottom of the case with the heatsink when mounting it with airflow going from front to back. That is why I ended up not using this case for my main rig when I upgraded the board in it to a Gigabyte X38-DQ6 from the old P5WDH deluxe I had been using. The socket placement on the Gigabyte board was closer to the edge of the mobo and I couldn't mount my original TRUE on it except in a horizontal postion with airflow either going to the case bottom or at my video card. Hopefully the P5Q Pro board I have installed in that case has enough clearance to mount the TRUE's in their normal orientation. If they will fit, I will just set the MC-TDX block aside while testing the TRUE's (hopefully, so I don't have to tear the loop apart.

Oh, and this will also be interesting as I will be running this in a normal case and will see if the extreme weight of the copper TRUE affects cooling if it isn't supported at the top.