To talk on Icrontic, just register!

It only takes 30 seconds.

Have an account? Sign in:

Forgot?
Page 1 of 4 1 234
 
Reply to Discussion Options
SimGuy
Your World. Delivered.
SimGuy
2,049 Posts
5 Jun 2003, 1:36am

Exclamation Newest Video Drivers (NVidia, ATI, 3dfx, Matrox, SiS & PowerVR)



DISCLAIMER:
This thread contains links to both official & BETA drivers that are available for each respective manufacturer. In no way, shape or form is Short-Media or myself responsible if these drivers cause any type of data loss, system malfunctions or odd occurances. Utilize the following files at your own risk.

WARNING: Beta and/or "Leaked" drivers have not been tested by your video card's manufacturer and are not guaranteed to work with your hardware.

DO NOT ATTEMPT TO INSTALL INCORRECT VIDEO DRIVERS FOR YOUR ADAPTER. YOUR SYSTEM MAY REFUSE TO BOOT AND/OR DATA LOSS MAY OCCUR.



Newest Video Drivers (ATI, NVidia, 3dfx, Matrox, SiS & PowerVR):

Introduction:

Since the dawn of the first Graphical Processing Unit, video adapter manufacturers have come to realize that the software utilized to drive the hardware is just as important as the hardware itself. Without a well-written, compact, efficient driver, even the fastest of video cards will perform miserably. From time to time, hardware manufacturers will release updated driver packages for use with their products. These updated driver packages contain software enhancements that can severely affect a video adapter's performance (which could result in substantial increase in performance). Because of this fact, it is very important, now more than ever, to update the video driver software utilized by the video adapter in your system.

This thread contains all of the latest, known drivers for video adapters made by mainstream manufacturers. Drivers can be downloaded by following the links available under each respective manufacturers heading.

If you see newer drivers available other than the ones listed here, post a notice in this thread and I'll make sure to get them added to the list ASAP.



ATI-Based Video Adapters
Radeon X850-X300, 9800XT-7000, Radeon DDR/VE & AIW Series

Catalyst 6.8 (Drivers Only)
  • Version: Unknown
  • Dated: 08/18/2006
  • Size: 12.4 MB / 15 MB
  • DL: 2K/XP :: XP64 :: 9x/ME (5.9)

    • Catalyst 6.8 (inc Control Center)
  • Version: Unknown / Unknown
  • Dated: 08/18/2006
  • Size: 34.7 MB / 38.3 MB
  • DL: 2K/XP :: XP64

    • Omega Catalyst 6.7
  • Version: 3.8.273 / 2.6.37
  • Dated: 08/15/2006
  • Size: 22.9 MB / 16 MB
  • DL: 2K/XP :: 9x/ME (4.2)




    • NVidia-Based Video Adapters
    Quadro, GeForce & TNT2 Series

    ForceWare 91.31 WHQL Official
  • Version: 6.14.10.9131
  • Dated: 06/23/2006
  • Size: 40.3 MB / 47.8 MB / 11.7 MB
  • DL: 2K/XP :: XP64 :: 9x/ME

    • ForceWare 91.33 Official Beta
  • Version: 6.14.10.9133
  • Dated: 06/29/2006
  • Size: 32 MB / 39.6 MB
  • DL: 2K/XP :: XP64 (91.31)

    • Omega ForceWare 66.93
  • Version: 1.6693
  • Dated: 04/06/2005
  • Size: 20.9 MB / 18.7 MB
  • DL: 2K/XP :: 9x/ME (45.23)




    • 3DFX-Based Video Adapters
    Voodoo 5-1, Voodoo Banshee & Voodoo Rush Series

    Voodoolizer V3/4/5 1.05
  • Version: 1.05.00 Final
  • Dated: 05/19/2003
  • Size: 7.00 MB
  • DL: 2K/XP :: 9x/ME

    • Fast Voodoo2 4.0 XP GE
  • Version: 5.04.7007.20064
  • Dated: 12/21/2003
  • Size: 8.17MB
  • DL: 2K/XP :: 9x/ME

    • X-MojoMotion VBanshee 1.0
  • Version: 1.0
  • Dated: 09/04/2002
  • Size: 3.5 MB
  • DL: 2K/XP :: 9x/ME




    • Matrox-Based Video Adapters
    Parhelia, Millennium, Mystique, Marvel, Productiva & M3D Series

    Parhelia AGP & P650/P750 1.11
  • Version: 1.11.00.114
  • Dated: 01/17/2006
  • Size: 10 MB / 12.2 MB / 3.35 MB
  • DL: 2K/XP :: XP64 :: NT 4.0 (1.05)

    • All Other Matrox Adapters
  • Drivers available @ Matrox.com




    • Other Manufacturers:

    Silicon Integrated Systems (SiS) :: PowerVR



    Instructions created by SimGuy.
    Driver listings provided by Short-Media members.
    Thread maintenance performed by Spinner.
    Bandwidth provided by various internet servers (thanks DriverHeaven & VoodooFiles).
    Special thanks goes to Terry Makedon from ATI & Dwight Diercks from NVidia.

    Last Updated: 2006-August-20 @ 01:17 GMT
    __________________


    Intel Core 2 Duo E6700 @ 3200 MHz :: Asus P5Q Deluxe :: 8 GB OCZ Reaper HPC DDR2-1066 (5-5-5-15) :: BFG GeForce 8800 GTX OC
    CM-830 Black :: 150 GB WD Raptor :: 1 TB Seagate Barracuda 7200.11 :: 24" Westinghouse L2410NM :: OCZ GameXStream 700W
    Reply with Quote
    SimGuy edited : 6 Sep 2004 at 2:54am .
    Spinner
    Getting it done!
    Spinner
    5,003 Posts
    12 Jun 2003, 6:48pm

    44.61 Beta 2000/XP

    http://www.warp2search.net/download....02000%20/%20XP
    __________________





    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    18 Jun 2003, 11:38pm
    Latest Additions:
    -> Added NVidia Detonator FX Driver 44.65 Beta (Win2K & XP) (thanks Bad_Karma)
    -> Added ATI Catalyst 3.5 Beta (Win2K & XP) (thanks Bad_Karma)
    -> Updated "Previous Display Drivers" listings
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    23 Jun 2003, 9:55pm
    Latest Additions:
    -> Added OFFICIAL ATI Catalyst 3.5 (All Windows Versions)
    -> Updated "Previous Display Drivers" listings
    Reply with Quote
    Spinner
    Getting it done!
    Spinner
    5,003 Posts
    9 Jul 2003, 6:38pm
    Detonator 44.67 WHQL released:

    http://www.short-media.com/forum/sho...&threadid=1254
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    10 Jul 2003, 12:11am
    Latest Additions:
    -> Added NVidia Detonator FX Driver 44.67 WHQL (Win2K & XP) (thanks Spinner)
    -> Updated "Previous Display Drivers" listings
    Reply with Quote
    Spinner
    Getting it done!
    Spinner
    5,003 Posts
    12 Jul 2003, 3:21pm

    Detonator 44.71 and 44.90 available

    http://www.short-media.com/forum/sho...&threadid=1361
    Reply with Quote
    danball1976
    Veteran Icrontian
    danball1976
    2,633 Posts
    12 Jul 2003, 3:33pm
    I haven't even tested 44.67 or the 44.71 yet.
    __________________
    Visit my Deviant Art profile - Visit my Fur Affinity profile
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    12 Jul 2003, 7:13pm
    The Detonator 44.71 WHQL Beta drivers are available for Windows 2000 & XP and will only work with the following NVidia-based graphics cards:

    GeForce FX 5900 Ultra
    GeForce FX 5900
    Quadro FX 3000
    GeForce FX 5800 Ultra
    GeForce FX 5800
    Quadro FX 2000
    Quadro FX 1000
    GeForce FX 5600 Ultra
    GeForce FX 5600
    GeForce FX 5600SE
    GeForce FX 5200 Ultra
    GeForce FX 5200
    Quadro FX 500

    Core driver files are dated June 23, 2003. WHQL-certified, but still a beta release.
    Reply with Quote
    Spinner
    Getting it done!
    Spinner
    5,003 Posts
    12 Jul 2003, 8:10pm
    Doh! yeah, I just noticed they were just for the FX line of cards. I'd better edit my news post.

    Thanks SimGuy
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    16 Jul 2003, 4:20am
    Latest Additions:
    -> Added ATI Catalyst 3.6 WHQL Drivers (Win2K/XP/Me/98) (thanks Al_Capown)
    -> Added ATI Control Panel 3.6
    -> Added NVidia Detonator FX 44.90 Leaked (Win2K/XP Only)
    -> Updated "Previous Display Drivers" listings
    -> Updated Thread Header & Added Introduction/Required Software
    Reply with Quote
    SimGuy edited : 16 Jul 2003 at 4:32am .
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    25 Jul 2003, 11:53pm
    Latest Additions:
    -> Added NVidia Detonator FX 45.20 Leaked (Win2K/XP Only) (Thanks GTac01)
    -> Updated "Previous Display Drivers" listings
    Reply with Quote
    Spinner
    Getting it done!
    Spinner
    5,003 Posts
    5 Aug 2003, 11:27pm
    http://www.short-media.com/forum/sho...4213#post24213

    44.65 Detonators, are now WHQL.
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    5 Aug 2003, 11:28pm
    Spinner said
    http://www.short-media.com/forum/sho...4213#post24213

    44.65 Detonators, are now WHQL.
    Nice find

    Added To That Giant Post Up Top
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    10 Aug 2003, 12:45am
    Latest Additions:
    -> Added NVidia Detonator FX 45.23 Leaked (Win2K/XP Only) (thanks Slick)
    -> Updated "Previous Display Drivers" listings
    Reply with Quote
    SimGuy edited : 10 Aug 2003 at 12:49am .
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    13 Aug 2003, 11:11pm
    Latest Additions:
    -> Added NVidia Detonator FX 45.24 Quadro Certified (Win2K/XP Only) (thanks Spinner)
    -> Added NVidia Detonator FX 45.23 WHQL (All Windows Versions) (thanks SimGuy)
    -> Updated "Previous Display Drivers" listings
    Reply with Quote
    SimGuy edited : 13 Aug 2003 at 11:54pm .
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    28 Aug 2003, 4:19am
    Latest Additions:
    -> Added Omega Catalyst 2.4.74a (Catalyst 3.6-based, Win2K/XP)
    -> Added Omega Detonator FX 44.03 (All Windows Versions)
    -> Added Voodoolizer V3/4/5 1.05 Drivers (All Windows Versions)
    -> Added Xpenter V2 X-Gamers 3 Drivers (All Windows Versions)
    -> Added X-MojoMotion Voodoo Banshee Drivers (All Windows Versions)
    -> Added Matrox Parhelia 512 Driver 1.04 (WinXP/2K/NT4)
    -> Removed "Previous Display Drivers" listings (who uses old drivers)
    -> Updated thread layout (and mistakenly pasted "sdfsdfsdf" where it shouldn't have been)
    Reply with Quote
    SimGuy edited : 28 Aug 2003 at 4:23am .
    Creep
    Icrontic Posting Maniac
    Creep
    415 Posts
    28 Aug 2003, 7:17am
    I like the new layout of the post, looks awsome, btw, you should add Omega's Voodoo 4/5 2K/XP drivers, they were the best ones I have ever found.
    __________________

    My Heatware

    Reply with Quote
    Spinner
    Getting it done!
    Spinner
    5,003 Posts
    28 Aug 2003, 3:40pm
    Nice work Simguy, love the new layout.
    Reply with Quote
    Enverex
    ~-+-~
    Enverex
    5,852 Posts
    28 Aug 2003, 6:00pm
    May want to scrap the blue devider bars because it makes the page too big for anyone using a screen resolution lower than 1024x768.

    NS
    __________________ RetroTracks - Classic Computer and Game Music
    Reply with Quote
    Geeky1
    No comment.
    Geeky1
    7,972 Posts
    28 Aug 2003, 6:31pm
    NS... two questions:

    Why use anything lower than 800x600?
    If the monitor can handle higher (which everything I've seen except ancient CRTs and the LCDs in some low-end laptops can) why on earth would you use 800x600 or less? I can't even stand 1024x768 anymore, and 1280x1024 is the absolute lowest I'll use...
    __________________ -MCCCXXXVII
    "Ignorance is forgivable. Stupidity is inexcusable."

    Resident Dual CPU Addict: 3 working duallies, 2 more in the parts drawer, and looking to add an Opteron dually to that list as soon as I can find a good motherboard...
    Reply with Quote
    Enverex
    ~-+-~
    Enverex
    5,852 Posts
    28 Aug 2003, 8:18pm
    Er...... sometimes it's not a question of choice but forced due to old/crap hardware, and/or other issues.

    Why use anything lower than 800x600?
    I said 1024x768.

    Some things may be your preference but that really has nothing to do with my point.

    NS
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    28 Aug 2003, 9:31pm
    Easy there guys. I usually design for 1024x768 as thats the minimum resolution most people use now adays.

    Personally, I run 1280x1024, so I usually end up pushing bars and things a little too far.

    I'll shrink the bars and see how things work out.

    Thanks for the comments & I'll definately look into adding the Omega voodoo drivers. I didn't even know that he made any!
    Reply with Quote
    Enverex
    ~-+-~
    Enverex
    5,852 Posts
    28 Aug 2003, 10:41pm
    If the thread allows tables then you could make the actual bars as their own invisible table and set the bar as a repeating backdrop but make the bar only say 10px wide, meaning regardless of the actual size the the persons browser, it will fit exactly.

    NS
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    4 Sep 2003, 4:34am
    FYI Only:

    Terry Makedon (ATI Catalyst Driver Programmer) has announced that the Catalyst 3.7 series of drivers is being polished and packaged as I type this.

    ATI users will be able to download the Catalyst 3.7's either later this evening or tomorrow afternoon and can expect to see many fixes implemented with regards to hanging games.
    Reply with Quote
    SimGuy edited : 4 Sep 2003 at 4:44am .
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    4 Sep 2003, 9:30pm
    Latest Additions:
    -> Added ATI Catalyst 3.7 WHQL (All Windows Versions)
    -> Added ATI Control Panel 3.7 (All Windows Versions)
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    9 Sep 2003, 12:16am
    Latest Additions:
    -> Added Omega Detonator FX 45.23 WHQL (All Windows Versions) (thanks Blackhawk)
    -> Added Omega Catalyst 3.7's (All Windows Versions) (thanks Blackhawk)
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    10 Sep 2003, 5:02pm
    FYI Only:

    The Catalyst 3.8 series of drivers is expected to be released within the first week of October 2003.

    Terry Makedon from the ATI Catalyst group has mentioned that there will be exciting new features integrated into these drivers and that these Catalyst's will be the single largest new-feature filled driver released EVAR by ATI.

    Rumour has it that the following features are going to implemented into the Catalyst 3.8's:

  • "SMARTSHADER" technology, implementing a higher Anti-Aliasing stepping that's one higher than the current max.
  • Adaptive Anti-Aliasing (possibly resembling RGSS)
  • Per-game settings of AA/AF settings that are selectable.
  • Revamped Control Panel layout (thank christ).
  • An official "Catalyst Destroyer" uninstaller that will completely remove all driver files & registry entries.
  • OpenGL 1.5 support.
  • "OVERDRIVE" technology, which will dynamically overclock your graphics adapter to the optimal level for increased performance. Overdrive will constantly monitor the temperature of the VPU and will adjust the speed as required to keep thermal issues from popping up.
  • "SMARTSAVE" technology, which will allow the ATI Display Driver to reset the graphics adapter when it stops responding to commands in most cases without requiring a system restart.

    Plus the usual performance increases & application compatability fixes. Looks like a winning set to me!
    • Reply with Quote
    Spinner
    Getting it done!
    Spinner
    5,003 Posts
    10 Sep 2003, 11:45pm
    Detonators 45.33 available for 2000/XP, they're the ones which fix that strange flickering problem.
    Reply with Quote
    danball1976
    Veteran Icrontian
    danball1976
    2,633 Posts
    11 Sep 2003, 2:08am
    SimGuy said
    Easy there guys. I usually design for 1024x768 as thats the minimum resolution most people use now adays.

    Personally, I run 1280x1024, so I usually end up pushing bars and things a little too far.

    I'll shrink the bars and see how things work out.

    Thanks for the comments & I'll definately look into adding the Omega voodoo drivers. I didn't even know that he made any!
    OT Here, 1280x1024 isn't a 4:3 resolution. 1280x960 is a true 4:3, so the 1280x1024 usually stretches things a bit. So therefore, I always run 1280x960
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    11 Sep 2003, 5:21am
    All the wallpapers I have are 1280x1024.
    A 5:4 aspect ratio is fine by me, plus it gives me more desktop space.

    On the 21" Trinitron, I run 1800:1440, again another 5:4 aspect ratio.

    If someone runs 800x600 on today's systems, they really should invest in a new monitor.
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    11 Sep 2003, 5:27am
    Latest Additions:
    -> Added NVidia Detonator FX 45.33 (Win2K/XP) (thanks Spinner)
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    24 Sep 2003, 10:16pm
    FYI Only:

    The world can expect to see the Catalyst 3.8 drivers to be released the afternoon of October 8th.

    It has been confirmed via ATI Staff that one of the main features will be that Catalyst will now include a game settings profile selector, in which you can store what level of AA/AF you want certain games to run at.

    As well, an integrated overclocking utility will be shipped with the Catalyst 3.8's, allowing anyone to overclock their ATI-based video adapter (if it supports it).

    More information will be available October 8th from www.atitech.ca
    Reply with Quote
    SimGuy edited : 25 Sep 2003 at 3:41am .
    GHoosdum
    tequilavangelist
    GHoosdum
    10,369 Posts
    24 Sep 2003, 11:19pm
    GRR! Cat 3.8 is released 5 days too late for me to download it before LANWAR!
    __________________ My flickr photostream.
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    30 Sep 2003, 4:25am
    Latest Additions:
    -> Added Matrox Parhelia 1.05 Driver (Win2K/XP Only) (thanks Spinner)
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    8 Oct 2003, 8:13pm
    Latest Additions:
    -> Added ATI Catalyst 3.8 WHQL (All Windows Versions)
    -> Added ATI Control Panel 3.8 (All Windows Versions)
    Reply with Quote
    SimGuy edited : 9 Oct 2003 at 12:27am .
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    9 Oct 2003, 12:28am
    Latest Additions:
    -> Added Omega Catalyst 3.8 (All Windows Versions) (thanks GHoosdum)
    -> Added NVidia Detonator FX 52.13 Beta (Win2K/XP Only)
    Reply with Quote
    SimGuy edited : 9 Oct 2003 at 12:36am .
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    24 Oct 2003, 7:43am
    Latest Additions:
    -> Added NVidia ForceWare 52.16 WHQL (Win2K/XP Only)

    //Edit: I appologize for having all the red "X's" on the main post, as the ISP webspace where those graphics are being hosted is offline for the next 10 days. I'm in the process of porting those graphics to a new host.

    //DoubleEdit: Graphics back online
    Reply with Quote
    SimGuy edited : 24 Oct 2003 at 9:36am .
    danball1976
    Veteran Icrontian
    danball1976
    2,633 Posts
    25 Oct 2003, 3:39am
    How are these at video playback? All of the drivers later than 44.03 have caused bad video playback (improper color and frame synching, and causing a sort of ghosting)
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    25 Oct 2003, 3:44am
    They seem to be working fine so far on my Asus GF4 Ti4400 & BFG Asylum GF FX 5900 Ultra, other than a visible choppiness in the original Unreal Tournament (however that could be due to the instances of folding@home running on both of those PC's).
    Reply with Quote
    danball1976
    Veteran Icrontian
    danball1976
    2,633 Posts
    25 Oct 2003, 4:00am
    As seen in my sig, I have a PNY Verto GeForce 4 Ti4200 AGP4x 64MB video card.

    For the life of me, I have never been able to get it to run in AGP mode on my KD7-RAID. It ran in AGP mode when I had my KX7-333R

    I'm hoping this issue will be resolved when I get the NF7-S v2.0, and if it doesn't then its the video card.
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    25 Oct 2003, 4:14am
    Have you tried disabling 8x VLINK in the BIOS?

    Reading up on the ABIT forums, a boatload of people have been having AGP problems with selected video cards on the KD7 & KD7-RAID motherboards. Disabling 8x VLINK seems to help in some situations.
    Reply with Quote
    danball1976
    Veteran Icrontian
    danball1976
    2,633 Posts
    25 Oct 2003, 4:30am
    Tried that, I don't think it ever worked.
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    3 Nov 2003, 9:25pm
    Latest Additions:
    -> Fixed Omega Catalyst 3.8 Download Links (Thanks MoXon)
    -> Fixed Omega Detonator FX 45.23 Download Links (Thanks MoXon)
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    5 Nov 2003, 7:42pm
    Latest Additions:
    -> Added ATI Catalyst Driver Suite 3.9 WHQL (All Windows Versions)
    -> Added ATI Control Panel 3.9 (All Windows Versions)
    Reply with Quote
    Mt_Goat
    Relentless Pursuit
    Mt_Goat
    4,937 Posts
    5 Nov 2003, 8:19pm
    Any reports on the 3.9's yet?
    __________________ I met 2 woman in a bar and they said that every good politician needs to start their career with a scandal. Then one of them told me that they were the best of friends and did everything together! So mount up cowboy!
    Reply with Quote
    SimGuy
    Your World. Delivered.
    SimGuy
    2,049 Posts
    5 Nov 2003, 8:21pm
    I haven't had a chance to peruse any of the other boards yet...
    I'm still downloading them as we speak..
    Reply with Quote
    Souriat
    Icrontic Duke of Haxor
    Souriat
    147 Posts
    19 Nov 2003, 10:02pm
    53.03 Drivers avalivable http://bfgtech.com/images/5303_IS-NV111403D.zip

    Updates to this driver:

    Improved support for HDTV Modes

    Corrected the following issues from 52.16:

    * Clone mode may be set for the GeForce FX 5600 although only one display is connected.
    * GeForce FX 5950 Ultra: When 4x FSAA is enabled, half of the screen is black in Tiger Woods 2004 introductory video.
    * GeForce4 MX 440 and GeForce4 Ti 4400, Windows XP: Blue-screen crash during Battlefield 1942 Desert Combat.
    * GeForce FX 5950 Ultra: Homeworld2 antialiased performance is slow.
    * GeForce FX 5950 Ultra and GeForce4 Ti 4400, Windows XP: Rendering corruption in Battlefield 1942 Desert Combat.
    * GeForce FX 5950 Ultra, Windows XP: “X2: The Threat” benchmark is choppy or jerky in some places.
    * All GeForce FX: Intermittently, Warcraft III videos are not displayed properly on some systems.

    Downloading them now hopefully i can use my tv with them the last set killed it.
    Reply with Quote
    Page 1 of 4 1 234
    Go Back   Icrontic Forums > Tech: Hardware > Graphics
    Reload this Page Newest Video Drivers (ATI, NVidia, 3dfx, Matrox, SiS & PowerVR)
    Jump to
    This Thread Search this Thread
    Search this Thread:

    Advanced Search

    Today's Posts - Mark All Read - Contact Us - Icrontic.com - Archive - Top

    Current time: 12:11pm (GMT)
    Powered by vBulletin®
    Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
    Get Vanilla instead. Trust me.