2100 tbred b�s anyone?

To talk on Icrontic, just register!

It only takes 30 seconds.

Have an account? Sign in:

Reply to Discussion

Options

TheLostSwede

Where's the ****ing beers?

3,212 Posts

9 Jun 2003, 1:43am

I�d like to compare a little. Mine HATES voltages over 2.1. This thing won�t even get into windows on that voltage, no matter what speed i have on the cpu.

This is what i have got so far: It�s a 03/02 brown chip.

It�s not a contest or so, i just want to compare a little since i think my chip acts a little weird.

Oh btw, the hot board is because i dont have any casefans on. With a front 120mm fan, it get lowered by 4 or 5c, and so do the cpu.

__________________ ...

Reply with Quote

Bad_Karma

The Moon In The Stream

230 Posts

9 Jun 2003, 9:59am

What the hell are you cooling that beast with?
Great Overclock! Too bad the 2.1 is the top.

Reply with Quote

TheLostSwede

Where's the ****ing beers?

3,212 Posts

9 Jun 2003, 10:33am

Im using a Maze 2 Block, Aqua block on the radeon, and a dual 120mm Radiator. Nothing fancy.

Last time i checked, 2.4 wasn�t fully stable, but it seem to be now, i have been folding gromacs for 24 hours.

Thanks!

Reply with Quote

Omega65

EPoX Evangelist!

2,891 Posts

10 Jun 2003, 1:03pm

Nothing Fancy he says....

DUAL 120mm Radiator, Water cooled Vid card and CPU....

__________________ Moderator: System Core Forum - Got a question??...shoot me a PM

Dell E1705 Core Duo 1.66ghz 1GB X1400 100GB
DFI NF4 SLI-DR - Opty 170 @ 2.5ghz - 7900GT - 2GB Corsair PC4400 Pro - Raptor 74GB
Abit AV8 - X2 4400+ @ 2.5ghz - 2GB G.Skill PC4000 - Raptor 74GB

Heatware: Omega65 150-0-0
Ebay Feedback Omega365 62-0-0

Athlon 64 Comparison: 12 CPUs - Single vs Dual Channel - 512K vs 1MB Cache

Reply with Quote

TheLostSwede

Where's the ****ing beers?

3,212 Posts

10 Jun 2003, 1:15pm

I think this cpu can do this an a good airsetup as well actually.
Gromacs and Prime 95 for 48 hours now. I think i have found the sweetspot on 1.90-1.92 V on this puppy.

Reply with Quote

Juggah0

Everyday Junglist

9 Posts

10 Jun 2003, 8:05pm

1700+ Tbred B JIUHB 0310, 2.13ghz @ stock vcore. and if a dual 120mm rad is fancy i guess my machine is roxor...

Nick

__________________ Samurai Jack is a junglist, he speaks against the evil beat of house music.

Reply with Quote

FormFactor

Calm like a bomb!

1,381 Posts

11 Jun 2003, 4:50am

I got my 2100 tbred b to that speed, but it would crash on the cpu test of 3dmark. So i dropped it to 2300 mhz with a 200 fsb...runs stable as hell. a little warm at just under 60 C . Its been foldin for months now without a reboot.

this is on pc3200 ram. kingston hyperx.

__________________

Reply with Quote

FormFactor

Calm like a bomb!

1,381 Posts

11 Jun 2003, 4:50am

Reply with Quote

muddocktor

Wandering about

6,250 Posts

11 Jun 2003, 9:53pm

Mack, your pic went south so I can't see what your oc is.

My 2100 is an AIUHB 0301MPMW and the highest stable overclock I've gotten out of it is 185X13 at 1.85v vcore air cooled. Actual vcore as per MBM was 1.92v. I generally run it at around 2250-2300 MHz and 1.75v vcore.

__________________ I have some computers running Seti@Home.

Reply with Quote

TheLostSwede

Where's the ****ing beers?

3,212 Posts

18 Jun 2003, 6:16pm

Mud, the pic is up again. It seems that your cpu oc much better.

Why dont you put that watercooling on the 2100 instead?

Reply with Quote

panzerkw

Forum Ninja

889 Posts

28 Jun 2003, 4:00am

pfft I need to try raising the voltage to around 1.85 -1.90. Windows refuses to complete boot at 200 FSB x 11 on my 2100. 190 x 11 works though.

__________________ 1987 300ZX (Z31) Turbo

My Z31 Videos Tour of my Z31 CM 3" Exhaust clip My Z31 on the Dyno

Reply with Quote

		Icrontic Forums > Tech: Hardware > Overclocking
2100 tbred b�s anyone?

Jump to

This Thread	Search this Thread
Print Email	Search this Thread: Advanced Search

Username
Password	Forgot?
Remember me