To talk on Icrontic, just register!

It only takes 30 seconds.

Have an account? Sign in:

Forgot?
 
Reply to Discussion Options
edcentric
Must keep folding
edcentric
2,480 Posts
4 Jun 2003, 4:24pm

I need info about AP1600 OC

I am having trouble getting much out of a XP1600. It is locked and it is in an old KT7A mobo. Before I start ripping other stuff out (video card) in order to get more FSB I need to know if it is worth it. I am running at 140FSB, 1470mhz.
Where did yours run? at what voltage?
I have great cooling and a good psu.
tks
__________________ A couple of folding boxes;

DFI LP Nf4 U-D, A64X2, 2GB ram, is folding again
MSI P965 Pt, C2D E6300, 2GB ram, old reliable

2.5 million points and counting
Reply with Quote
Thrax
Cad
Thrax
23,402 Posts
4 Jun 2003, 5:04pm
If it's an AGOIA, you can get a good 1830MHz out of it at 1.85v.

If you're running at 140 x 12.5, that's still 1750, which is approximately Athlon XP 2100/2200 speeds.

On my old KX7-333R, my 1600 got up to 1830 at 1.85v, and many got similar clocks on boards that could handle it.

I think 1750 could be done on 1.75v.
__________________ Robert Hallock
Technical Analyst
Twitter | LinkedIn

CPU: Core 2 Duo E6420 @ 3.5GHz (500*7)
MoBo: DFI LanParty DK P35-T2R/S
RAM: 4GB G.SKILL PC8500
VID: NVIDIA GeForce GTX 275
HSF: Thermalright Ultra-120
Reply with Quote
Omega65
EPoX Evangelist!
Omega65
2,891 Posts
4 Jun 2003, 8:59pm
Thrax is right on the money

Your KT7A will PROBABLY run a Tbred 1700+ with no problems. I have a v1.1 and a v1.2 that both ran 1700+ ($50) easily.

You can set it to run 12.5x FSB150 = 1875mhz @ stock voltage
__________________ Moderator: System Core Forum - Got a question??...shoot me a PM

Dell E1705 Core Duo 1.66ghz 1GB X1400 100GB
DFI NF4 SLI-DR - Opty 170 @ 2.5ghz - 7900GT - 2GB Corsair PC4400 Pro - Raptor 74GB
Abit AV8 - X2 4400+ @ 2.5ghz - 2GB G.Skill PC4000 - Raptor 74GB

Heatware: Omega65 150-0-0
Ebay Feedback Omega365 62-0-0

Athlon 64 Comparison: 12 CPUs - Single vs Dual Channel - 512K vs 1MB Cache
Reply with Quote
fuxor
Icrontic Duke of Haxor
fuxor
240 Posts
4 Jun 2003, 9:11pm
I ran mine at 180x10@1.85v on a KX7... what kind of memory are you using?

Unlocking isn't too hard... you could then run at a higher fsb and get some more power out of that sucker.
__________________ You shouldn't say anything bad about illiterate people... you should write it all down!
Reply with Quote
Go Back   Icrontic Forums > Tech: Hardware > Overclocking
Reload this Page I need info about AP1600 OC
Jump to
This Thread Search this Thread
Search this Thread:

Advanced Search

Today's Posts - Mark All Read - Contact Us - Icrontic.com - Archive - Top

Current time: 9:25am (GMT)
Powered by vBulletin®
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Get Vanilla instead. Trust me.