Getting ready for tomorrow's delivery.
Well, I started getting my A7N8X ready for tomorrow's Fedex delivery, which will have my XP2500 from Newegg. I just flashed my bios to the 1004 uber bios and so far, no problems with it. I'm about to play with the fsb speed with my 2100 that's presently in it and see if I can get any higher on the fsb speed than before, but it might just have been the proc crapping out because of the lack of lower multi's on the A7N8X without modding the proc.
Then I'm going to pull the box down and take the nb cooler off and install a fan on it to help keep it cooled down.
After I see what it will do in this board, I'm going to try it in some older mobo's to see if they can boot and run with a Barton. I'll be trying it in my 8KHA+, KG7-R and K7T Turbo 2 boards, which all will sense Tbred B's OK but don't have an update for Barton. I'll be posting which ones work and which don't as I try them.
The highest I was ever able to run it before with the original 1001C or 1002b1 uber bios was 189 fsb. I'll let it fold a few more frames here then soo how much higher I can go with this proc.
