USB 2.0 Problems

Trickster-79Trickster-79
edited May 2004 in Hardware
Hello again,
At last i got my NF7-SL Motherboard,
i installed XP with the SP1
all the drivers from nvidia,microsoft, Updates DX9 and the board bios
and everything else that is needed..
now everything is fine except to the USB 2.0

Usb.jpg
in the device manager i see that all my usb aint 2.0
i also connected the 2xUSb 2.0 + Firewire card the added inside.

i opened the files inside Abit CD in the usb dir, and forced the USB to Update
the drivers to those (in C:\win\drivers...) and still usb 1.

any ideas ???

thanks for ur time
Trickster79

Comments

  • Omega65Omega65 Philadelphia, Pa
    edited April 2004
    I have a NF7-s v2.0 and that's what mine shows also.

    Your USB 2.0 is operational. If they weren't, you'ld have a Yellow Exclamation symbol next to the devices
  • Trickster-79Trickster-79
    edited April 2004
    you sure about that ? all the other boards is saw ( even in the NF7-S book they show how to add USB 2.0 to win2k and in the picture of the system devices u see that it say USB 2.0..etc )
    i mean can it be i got usb2 up and running and it shows i got usb1 ?
  • hypermoodhypermood Smyrna, GA New
    edited April 2004
    I don't have any USB 2.0 devices but mine shows a separate USB 2.0 hub. This is from Windows 2000 BTW.
    usb.jpg 12.6K
  • SputnikSputnik Worcester, MA
    edited April 2004
    Omega's right, as per usual, got the same thing here on the same board
  • teflemingtefleming
    edited April 2004
    Correct me if I'm wrong, but XP (SP1 and later) has built-in USB2 Support, which might be why it doesn't show any difference between USB1.1 and USB2.

    My Shuttle doesn't specifically designate anything USB2, just USB Root Hub. (I'm running XP SP2 RC1)
  • hypermoodhypermood Smyrna, GA New
    edited April 2004
    That's pretty much what I was thinking and the reason I made it clear that the image from from a Windows 2000 box. I don't have XP so I can't verify any further.
    tefleming wrote:
    Correct me if I'm wrong, but XP (SP1 and later) has built-in USB2 Support, which might be why it doesn't show any difference between USB1.1 and USB2.

    My Shuttle doesn't specifically designate anything USB2, just USB Root Hub. (I'm running XP SP2 RC1)
  • GobblesGobbles Ventura California
    edited April 2004
    usb2 support is built into sp1.

    As for your situation...

    Look at the connector make sure you ran the right cable to the right header on the motherboard, alot of people connect the fire to the usb and the usb to the firewire and wonder why it dont work. Please double check it.

    If not and you cant get it to work, then let me know. Ill send you another usb only pci slot usb adapter that will work for the shipping cost alone. I have lots and lots of usb expansion things. It dont have firewire on it but it does have 2 usb ports.

    Also do any usb devices work in the expansion thingy?

    Gobbles
  • dieterdieter hot rainy batam island, ID
    edited May 2004
    why don't you just try connecting a USB2.0 device to the port?
    if it complains, something like "a hi-speed usb device plugged into non hi-speed usb hub", then your USB port is USB1.1 only.
Sign In or Register to comment.