need help with a 2100

MAGICMAGIC Doot DootFurniture City, Michigan Icrontian
edited June 2004 in Hardware
i just got a new 2100 to try out. its water cooled and i can have the voltage at 1.85. ive been trying different multiplier settings and fsb but i can seem to find something stable. does anyone oced this cpu and have any advice

Comments

  • ketoketo Occupied. Or is it preoccupied? Icrontian
    edited June 2004
    Need a bit more info - stepping, dates etc.

    I have a TBred B 2100+ that's been running 11X200 or better for over a year now...
  • muddocktormuddocktor
    edited June 2004
    I have one that I used to overclock in a single proc board before I modded it into an MP2600 but it was an older, unlocked processor. I seem to remember it's ceiling was somewhere around 2300 MHz at 1.85v.
  • GHoosdumGHoosdum Icrontian
    edited June 2004
    I had an XP2100+ Tbred-b that ran stable at 2.3GHz (11.5x200) aircooled. Most of the 2100+ chips I OC'd though I simply set to 166FSB and let them go at XP2700+ speed.
  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2004
    ok, ill take off my block and check
  • GHoosdumGHoosdum Icrontian
    edited June 2004
    What thermal paste were you using? You may not have had complete contact or something on it, or the paste may have seperated out in the tube if you let it sit for a long while... Try with a new(ish) tube of AS5 or Ceramique.
  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2004
    arctic silver III, and when i took it off it had contact on the hole chip. i made it threw 3dmark @ 13x170 . i check the chip and it is axda2100dut3c 9726782380322 jiuhb0308vpmw made in 1999
  • muddocktormuddocktor
    edited June 2004
    Well, that's an unlocked chip made in week 8 of 2003, so you can back the multiplier down and raise the fsb speed up so that you get better memory bandwidth, depending on your mobo of course. As far as the ultimate oc out of the chip, that's just a crapshoot. I do remember that my 2100 was an AUIHB stepping though.
  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2004
    i got 2.326ghz @ 12.5x186
  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2004
    i ran 3dmark and just played ut2k4 for like an hour without any crashes so i think is good
  • GHoosdumGHoosdum Icrontian
    edited June 2004
    Ya, my chip was an AIUHB chip as well - has a seriously low batch number (11) too.

    I'd think the JIUHB would OC pretty well too, since all the great OC'ing 1700+ chips were JIUHBs too.
  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2004
    ****, it failed last night. i went back to 13 multiplier cuz i was getting pretty good results there. ive been folding all day at 173 fsb
Sign In or Register to comment.