15 Month Burn-In

ThraxThrax 🐌Austin, TX Icrontian
edited July 2004 in Hardware
So here it is. Screenshot says everything.

JIUHB, DLT3C. 1700+.

Comments

  • MadballMadball Fort Benton, MT
    edited July 2004
    Wow, and on 1.7 volts. Nice.
  • MJOMJO Denmark New
    edited July 2004
    OMG wish I could do that.
    Nice voltage. :thumbsup:
    I'm stuck with a DUT3C that will do 2250 (225x10) at 1.95V (1.92 IRL)
    My memory can do at least 230 MHz, but the processor will not.
    I am considering a switch to an XP-M, I just need the money for it.
  • JimboraeJimborae Newbury, Berks, UK New
    edited July 2004
    Thats good for such a low voltage. Gotta love those chips, have you tried to see what it max's out to. I have one that will do about 2.65ghz but only at 2v.
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    what cooling and mem settings?
    great work.
  • ThraxThrax 🐌 Austin, TX Icrontian
    edited July 2004
    <b>Memory:</b>
    2/2/2/11
    2.7v
    4:4
    CPU interface disabled

    <b>Cooling:</b>
    Thermalright SLK-947
    Thermaltake SmartFan II
    120F full load

    I can't test how far it goes, because the temperatures are outside my comfort range farther than 2.4GHz.
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    does it really make much difference to use 4:4 as opposed to 6:6?
  • GnomeWizarddGnomeWizardd Member 4 Life Akron, PA Icrontian
    edited July 2004
    i had a 1700+ that did 2.4 with 1.7V with a slk 900A prolly the same chip ran cool too

    prolly the same chip and mobo
  • EMTEMT Seattle, WA Icrontian
    edited July 2004
    Argh maybe I should have dumped the extra money for a DLT3C but the DUT3C was frickin $50. Oh well, no biggie.
  • ThraxThrax 🐌 Austin, TX Icrontian
    edited July 2004
    I got this chip for $60 from Newegg back in the day.
  • EMTEMT Seattle, WA Icrontian
    edited July 2004
    That's where I bought mine, you sure got lucky :)
    There were places where you could buy it as DLT3C for quite a bit more.
Sign In or Register to comment.