Point of unlocking Xp's

WuGgaRoOWuGgaRoO Not in the shower Icrontian
edited July 2003 in Hardware
I have an xp 1900+...i wanna oc it a ridicilious amount (its under an slk900 and an enermax fan pushing 50+ cfms) regardless I remember reading about using hte lead from a pencil and connecting the bridges...now whats the point of the brides...what does connecting them allow me to do...should i bother connecting them?? its just a general question about the unlocking of xp cpus

Comments

  • paroxymparoxym Toronto, Canada
    edited July 2003
    The XP1900 cannot be unlocked by joining the bridges with a pencil. I believe it was the older Tbirds that you could do that with.
    For the xp1900 you have to fill the pits in between the bridges with some kind of, well, filler. When I did it I used super glue to fill the pits and then a Rear Windshield Defogger repair kit to join the bridges. DJ-Quack wrote a nice little guide on unlocking paliminos. You can find it HERE. It will walk you through the steps.
    And as to what unlocking does... well, it unlocks the multiplier on the chip allowing you to drop the Multi and raise the bus speed. I think that about covers all the bases. :p
    Have Fun :thumbsup:
  • TheBaronTheBaron Austin, TX
    edited July 2003
    connecting certain bridges allows up to unlock the multipliers. so if you want a really high FSB, since you'll probably have to lower the mults to do so, you'll need to unlock your cpu. there are articles all over the web about unlocking XP's, but using pencil lead may not be the best solution

    or, you know, just listen to paroxysm
  • WuGgaRoOWuGgaRoO Not in the shower Icrontian
    edited July 2003
    thanks bros...thanks
  • WuGgaRoOWuGgaRoO Not in the shower Icrontian
    edited July 2003
    alright..anyone know any more indepth websites about xp unlocking and thunderbird unlocking..can anyone hook a crackah up
  • GargGarg Purveyor of Lincoln Nightmares Icrontian
    edited July 2003
    Is Seversphere still around? He made a video of how to unlock a palomino. I used it the first time I unlocked one and it was really helpful. I remember in his sig (this is one of those things that's just hard to forget) that he was the proud owner of smallmonkeydick@hotmail.com. Wonder if he checks it? "D
  • El-CheapoEl-Cheapo Central California
    edited July 2003
    Here ya go,WuGgaRoO:

    http://www.vr-zone.com/guides/AMD/AthlonXPUnlock/

    Wouldn't hurt to have a microscope around ,and the steady hands of a surgeon.

    One caution: Do NOT get ANY conductive material in the "pits"-there's a copper grid exposed in them ,and shorting it out causes the cpu to not function-until you get every bit of it out of those pits.

    Make sure they are well sealed up before painting the conductive material over the top of them!

    Speaking from experience here.

    Good Luck,

    ec
  • WuGgaRoOWuGgaRoO Not in the shower Icrontian
    edited July 2003
    what about the thunderbirds...which bridge should i connect
  • El-CheapoEl-Cheapo Central California
    edited July 2003
    T-Bird info here:

    http://www.x-ocm.com/REVIEWS/unlocktb.htm

    Have fun!


    ec
  • WuGgaRoOWuGgaRoO Not in the shower Icrontian
    edited July 2003
    thankyou yet again bro
    /edit
    will artic silver be conductive ebough to bridge the gaps??
  • GargGarg Purveyor of Lincoln Nightmares Icrontian
    edited July 2003
    I use rear window defogger repair kit.

    And seriously, look up seversphere for that video. REALLY helpful.
  • El-CheapoEl-Cheapo Central California
    edited July 2003
    I think You should use a rear window defogger repair kit,but that's just because I don't know the answer to your question:confused:

    Perhaps someone else here who's tried it may know for sure.

    ec
  • seversphereseversphere
    edited July 2003
    Tbird use pencil first then tape over. Palomino you need conductive fluid from the repair kit or trace pen. There should be a work around for the palomino by which you connect pins on the underside of the chip or do the same thing by means of a wire placed into the two holes of a socket so that when the chip is in it will connect the pins.

    www.ocinside.de has guides for how the bridges are set for every multiplier/voltage/fsb setting of tbirds/palo/tbred etc.
  • seversphereseversphere
    edited July 2003
    after looking around a bit I think the easy way is just for Tbreds and Bartons :(
  • WuGgaRoOWuGgaRoO Not in the shower Icrontian
    edited July 2003
    awww shucks..ohwell i guess ill buy the window epoxy
    /edit
    it says heat resistant tape...what the hell is that?? like electrical tape??
  • seversphereseversphere
    edited July 2003
    don't buy the window crack repair or the tab adhesive. It has to be REAR WINDOW DEFOGGER REPAIR kit. You want the bottle of orange liquid from it.

    http://www.permatex.com/products/prodidx.asp?automotive=yes&f_call=get_item&item_no=15067
Sign In or Register to comment.