My pc is not beeping

starburstarbur
edited August 2004 in Hardware
When I turn on my monitor it says "No signal input" and seems to receive nothing from my comp. This didn't happen b4 but I was having problems with system hanging so I decided to clear CMOS. Problem remained so I decided to take out the battery under the CMOS jumper and let it rest for 30 mins. I reattached it to my mobo and it was then I received "No signal input"
Various things I have tried already:
-Reseating memory and placing it on all 3 different slots
-Reattaching video card firmly until "click"
-Reattaching heatsink and processor
-Taking out battery for 20 secs
-Clearing CMOS
-Taking out mobo and using only CPU,Ram,Video Card
-Pulling out IDE cables 1st cd-rw+dvdrom and HDD and Floppy
-Reattaching ATX connectors



Im not sure if my system is beeping, but the red and green light on my mobo does light up and the front of my tower has a green and red light also.

Specs:
NF7 v2.0 Bios(24)
Athlon XP 2000 1.66ghz
512 DDR SDRAM
Xtasy Radeon 9800 Pro 128MB
Antec SL 350w 12v@21a
Samsung DVD-ROM
Samsung CD-RW
80GB HD

By the way... Im wondering if all this power on and power off in a matter of seconds continously will damage my HD?

Comments

  • NomadNomad A Small Piece of Hell Icrontian
    edited August 2004
    No signal input is what I get when my monitor is on and my computer itself is off completely. Do you have another video card you could test possibly?
  • starburstarbur
    edited August 2004
    Just tested with my old Geforce MX 2 to no avail.
  • botheredbothered Manchester UK
    edited August 2004
    I had this once, it was a nightmare. Turned out one stick of RAM had gone taking the CPU and graphics card with it (or any pematation). I think that's unusual but it was an expensive fix.
Sign In or Register to comment.