Dell P1110 21" monitor

wileywiley
edited January 2005 in Hardware
I have a Sony/Dell P1110 monitor that at first was very bright, now there is no picture at all. I have had some experience in the past working on monitors, but I need some expert help with this one. There appears to be no heater voltage. All other supply voltages are present.
I need to know what the proper voltage level (heater voltage) is. If there are any techys out there who have experience with these beasts, let me know.

Comments

  • polarys425polarys425 Harrisonburg, VA
    edited January 2005
    http://www.short-media.com/forum/showthread.php?t=19549
  • nzmikeynzmikey
    edited January 2005
    wiley wrote:
    I have a Sony/Dell P1110 monitor that at first was very bright, now there is no picture at all. I have had some experience in the past working on monitors, but I need some expert help with this one. There appears to be no heater voltage. All other supply voltages are present.
    I need to know what the proper voltage level (heater voltage) is. If there are any techys out there who have experience with these beasts, let me know.

    Hi,

    Ive got the exact same problem!.. did you manage to find a fix for this? I did copy from this guide here http://www.hutzelman.com/home/hardware/mods/monitor/ because I had the bright picture problem but after adding the resistor there is no picture at all..

    to make it worse I cannot find my monitor cable anywhere .. should it read 'check signal' or something when turning on the monitor?

    Thanks for any info!
    Mike
    badfan@orcon.net.nz
Sign In or Register to comment.