Windows Me - won't boot

Damage-Inc-Damage-Inc- New Jersey
edited January 2005 in Hardware
Hey. Was installing software for new printer. On reboot all I got was spalsh Windows Me screen. The system will not progress from that point. Tried to re-boot in Safe Mode but when I select that option, it returns to the Windows Me screen.

Thought about pulling hard drive, putting it in an external hard drive case and try and pull off information and just reformat.

Any suggestions?

Comments

  • maxanonmaxanon Montreal
    edited January 2005
    Have you pressed ESC at the splashie to see what's behind? Does the computer freeze (causing wierd noises when moving the mouse/typing on the keypad)?
  • Damage-Inc-Damage-Inc- New Jersey
    edited January 2005
    It only starts to make noise during start-up the stops and all I see is that stupid Windows Me screen!

    Got no responce from ESC
  • Damage-Inc-Damage-Inc- New Jersey
    edited January 2005
    Correction!

    Retried hitting ESC when powering up.

    Received the following on a black screen, "Please wait while Setup updates your configuration files. This may take a few minutes."

    Has been like that for 5-10 minutes now.

    Anybody?

    Buller? :shakehead
  • Damage-Inc-Damage-Inc- New Jersey
    edited January 2005
    Banged around some more ...

    Now I'm getting " Windows could not upgrade the file %1 from %2 %1: %2 "

    Can't follow instruction provided by Microsoft :

    http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3Bq283069

    because I can't get it to boot

    However, even though it won't let me go into Safe Mode I think it will let me do a step-by-step configuration.

    Out of my league on this one. :confused:
  • gibbonslgibbonsl Grand Forks AFB
    edited January 2005
    try leaving it that way for about an hour

    I went to sleep one time because I was fed up with it(same problem) when I woke up it was fine, on desktop and reboots when fine :wtf:
  • gibbonslgibbonsl Grand Forks AFB
    edited January 2005
    Damage Inc. wrote:
    Banged around some more ...

    Now I'm getting " Windows could not upgrade the file %1 from %2 %1: %2 "

    Can't follow instruction provided by Microsoft :

    http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3Bq283069

    because I can't get it to boot

    However, even though it won't let me go into Safe Mode I think it will let me do a step-by-step configuration.

    Out of my league on this one. :confused:

    can you boot into dos?

    need to run disk check

    can not remenber the command for it, if you type help the commands should come up
  • Damage-Inc-Damage-Inc- New Jersey
    edited January 2005
    gibbonsl wrote:
    can you boot into dos?

    need to run disk check

    can not remenber the command for it, if you type help the commands should come up


    Thank you for your help! :D

    Downloaded Me boot disk from downloads, got into DOS and ran scandisk. Taking forever but it appears that I have a bad cluster. Guessing that it only became apparent when I was tried to load new software and it was copied over that area.

    Short-Media Forums Rocks!
  • gibbonslgibbonsl Grand Forks AFB
    edited January 2005
    np
  • maxanonmaxanon Montreal
    edited January 2005
    good, glad everything went well.
Sign In or Register to comment.