help! wu not finishing

TropicalTropical
edited August 2003 in Folding@Home
here is the thing, when i get to the end of a wu, the core like crashes and starts again (i think) Can someone help?

here is the log file:

[14:28:57] + Working...
[14:33:27] Finished a frame (390)
[14:49:34] Finished a frame (391)
[15:05:45] Finished a frame (392)
[15:21:54] Finished a frame (393)
[15:38:05] Finished a frame (394)
[15:51:02] CoreStatus = 1 (1)
[15:51:02] Client-core communications error: ERROR 0x1
[15:51:02] Deleting current work unit & continuing...
[15:51:07] + Attempting to get work packet
[15:51:07] - Connecting to assignment server
[15:51:11] - Successful: assigned to (171.64.122.143).
[15:51:11] + News From Folding@Home: Welcome to Folding@Home
[15:51:11] Loaded queue successfully.
[15:51:12] + Closed connections
[15:51:17]
[15:51:17] + Processing work unit
[15:51:17] Core required: FahCore_65.exe
[15:51:17] Core found.
[15:51:17] Working on Unit 03 [August 19 15:51:17]
[15:51:17] + Working ...
[15:51:17] Folding@Home Client Core Version 2.47 (June 14, 2002)
[15:51:17]
[15:51:17] Proj: work/wudata_03
[15:51:17] Done: 22942 -> 142973 (decompressed 623.1 percent)
[15:51:17] nsteps: 5000000 dt: 2.000000 dt_dump: 250.000000 temperature: 298.000000
[15:51:17] xyzfile:
[15:51:17] " 393 p638_L939_K12M_ext
[15:51:17] 1 N 12.014942 -37.950206 62.496271 20..."
[15:51:17] keyfile:
[15:51:17] "parameters ./proj638.prm
[15:51:17] NOVERSION
[15:51:17] ARCHIVE
[15:51:17]
[15:51:17] cutoff 16.0
[15:51:17] taper 12...."
[15:51:17]
[15:51:17] - Couldn't get size info for dyn file: work/wudata_03.dyn
[15:51:17] Starting from initial work packet
[15:51:17]
[15:51:18] Protein: p638_L939_K12M_ext
[15:51:18] - Run: 146 (Clone 55, Gen 6)
[15:51:18] - Frames Completed: 0, Remaining: 400
[15:51:18] - Dynamic steps required: 5000000
[15:51:18]
[15:51:18] Writing local files:
[15:51:18]
[15:51:18] parameters work/wudata_03.prm
[15:51:18] - Writing "work/wudata_03.key": (overwrite) successful.
[15:51:18] - Writing "work/wudata_03.xyz": (overwrite) successful.
[15:51:18] - Writing "work/wudata_03.prm": (overwrite) successful.
[15:51:21] - Writing "work/wudata_03.key": (append) successful.
[15:51:21]
[15:51:21] PROJECT="work/wudata_03", NSTEPS=5000000, DT=2.0000, DTDUMP=25.000000, TEMP=298.00
[15:51:22] TINKER: Software Tools for Molecular Design
[15:51:22] Version 3.8 October 2000
[15:51:22] Copyright (c) Jay William Ponder 1990-2000
[15:51:22] portions Copyright (c) Michael Shirts 2001
[15:51:22] portions Copyright (c) Vijay S Pande 2001
[16:07:10] Finished a frame (1)

also, does anyone know any good tweaks for my crappy 1.3 p4 so i can speed up my frames.

Comments

  • shwaipshwaip bluffin' with my muffin Icrontian
    edited August 2003
    is the pc that's having problems overclocked?
  • mmonninmmonnin Centreville, VA
    edited August 2003
    Its not OCed if its a 1.3 P4. Thats the lowest P4s that were made.

    Does it do it everytime of just this once. If its just this once then dont worry about it. It happens to everyone. You might get partial credit for that too.
  • TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
    edited August 2003
    I have had lots of problems with gromacs recently. Freezing all the time. I KNOW this pc is perfectly stable. I deleted the core so it downloaded it again. Hopefully things works better now.

    This problem was with 2 different types of Wu´s.
  • shwaipshwaip bluffin' with my muffin Icrontian
    edited August 2003
    Tropical said
    also, does anyone know any good tweaks for my crappy 1.3 p4 so i can speed up my frames.

    mmonnin said
    Its not OCed if its a 1.3 P4. Thats the lowest P4s that were made.


    The 'also' leads me to believe that it could possibly be anther system
  • mmonninmmonnin Centreville, VA
    edited August 2003
    Its because of the way AMD implemented SSE in the later Athlon CPUs. Pals have no problem at all, what I have and I have no problems. Tbred, esp Bs, on the other hand get errors more often.
  • TropicalTropical
    edited August 2003
    The 'also' leads me to believe that it could possibly be anther system
    No i just wanted some tweaks so i can finish my wu faster but i do have an another computer that should be online by the end of the month. anyways, the problem happend again this morning but it was't at the end.
    here is the log:

    [18:10:11] Core required: FahCore_65.exe
    [18:10:11] Core found.
    [18:10:11] Working on Unit 03 [August 20 18:10:11]
    [18:10:11] + Working ...
    [18:10:17] Folding@Home Client Core Version 2.47 (June 14, 2002)
    [18:10:17]
    [18:10:17] Proj: work/wudata_03
    [18:10:18] Done: 22942 -> 142973 (decompressed 623.1 percent)
    [18:10:18] nsteps: 5000000 dt: 2.000000 dt_dump: 250.000000 temperature: 298.000000
    [18:10:18] xyzfile:
    [18:10:18] " 393 p638_L939_K12M_ext
    [18:10:18] 1 N 12.014942 -37.950206 62.496271 20..."
    [18:10:18] keyfile:
    [18:10:18] "parameters ./proj638.prm
    [18:10:18] NOVERSION
    [18:10:18] ARCHIVE
    [18:10:18]
    [18:10:18] cutoff 16.0
    [18:10:18] taper 12...."
    [18:10:18]
    [18:10:18] Hashes matched on file work/wudata_03.dyn
    [18:10:27] ARC file integrity verified
    [18:10:27] Restarting from checkpointed files.
    [18:10:27]
    [18:10:27] Protein: p638_L939_K12M_ext
    [18:10:27] - Run: 146 (Clone 55, Gen 6)
    [18:10:27] - Frames Completed: 82, Remaining: 318
    [18:10:27] - Dynamic steps required: 3975000
    [18:10:27]
    [18:10:27] Writing local files:
    [18:10:28]
    [18:10:28] parameters work/wudata_03.prm
    [18:10:28] - Writing "work/wudata_03.key": (overwrite) successful.
    [18:10:28] - Writing "work/wudata_03.xyz": (overwrite) successful.
    [18:10:29] - Writing "work/wudata_03.prm": (overwrite) successful.
    [18:10:32] - Writing "work/wudata_03.key": (append) successful.
    [18:10:32]
    [18:10:32] PROJECT="work/wudata_03", NSTEPS=3975000, DT=2.0000, DTDUMP=25.000000, TEMP=298.00
    [18:10:32] TINKER: Software Tools for Molecular Design
    [18:10:32] Version 3.8 October 2000
    [18:10:32] Copyright (c) Jay William Ponder 1990-2000
    [18:10:32] portions Copyright (c) Michael Shirts 2001
    [18:10:32] portions Copyright (c) Vijay S Pande 2001
    [18:50:36] Finished a frame (83)
    [19:07:06] Finished a frame (84)
    [19:23:45] Finished a frame (85)
    [19:40:23] Finished a frame (86)
    [19:57:03] Finished a frame (87)
    [20:13:44] Finished a frame (88)
    [20:31:58] Finished a frame (89)
    [20:44:11] CoreStatus = 1 (1)
    [20:44:11] Client-core communications error: ERROR 0x1
    [20:44:11] Deleting current work unit & continuing...
    [20:44:15] + Attempting to get work packet
    [20:44:15] - Connecting to assignment server
    [20:44:17] - Successful: assigned to (171.64.122.108).
    [20:44:17] + News From Folding@Home: Welcome to Folding@Home
    [20:44:17] Loaded queue successfully.
    [20:44:18] + Closed connections
    [20:44:23]
    [20:44:23] + Processing work unit
    [20:44:23] Core required: FahCore_65.exe
    [20:44:23] Core found.
    [20:44:23] Working on Unit 04 [August 20 20:44:23]
    [20:44:23] + Working ...
    [20:44:23] Folding@Home Client Core Version 2.47 (June 14, 2002)
    [20:44:23]
    [20:44:23] Proj: work/wudata_04
    [20:44:24] Done: 15970 -> 100484 (decompressed 629.2 percent)
    [20:44:24] nsteps: 5000000 dt: 2.000000 dt_dump: 250.000000 temperature: 296.000000
    [20:44:24] xyzfile:
    [20:44:24] " 227 P679_TZ3_NAT
    [20:44:24] 1 N3 67.799780 17.087998 88.615982 124 2..."
    [20:44:24] keyfile:
    [20:44:24] "parameters ./proj622.prm
    [20:44:24] NOVERSION
    [20:44:24] ARCHIVE
    [20:44:24]
    [20:44:24] printout 1000
    [20:44:24] writeout ..."
    [20:44:24]
    [20:44:24] - Couldn't get size info for dyn file: work/wudata_04.dyn
    [20:44:24] Starting from initial work packet
    [20:44:24]
    [20:44:24] Protein: P679_TZ3_NAT
    [20:44:24] - Run: 23 (Clone 34, Gen 8)
    [20:44:24] - Frames Completed: 0, Remaining: 400
    [20:44:24] - Dynamic steps required: 5000000
    [20:44:24]
    [20:44:24] Writing local files:
    [20:44:24]
    [20:44:24] parameters work/wudata_04.prm
    [20:44:24] - Writing "work/wudata_04.key": (overwrite) successful.
    [20:44:24] - Writing "work/wudata_04.xyz": (overwrite) successful.
    [20:44:24] - Writing "work/wudata_04.prm": (overwrite) successful.
    [20:44:27] - Writing "work/wudata_04.key": (append) successful.
    [20:44:27]
    [20:44:27] PROJECT="work/wudata_04", NSTEPS=5000000, DT=2.0000, DTDUMP=25.000000, TEMP=296.00
    [20:44:28] TINKER: Software Tools for Molecular Design
    [20:44:28] Version 3.8 October 2000
    [20:44:28] Copyright (c) Jay William Ponder 1990-2000
    [20:44:28] portions Copyright (c) Michael Shirts 2001
    [20:44:28] portions Copyright (c) Vijay S Pande 2001
    [20:56:24] Finished a frame (1)

    any ideas why is this happening?
  • mmonninmmonnin Centreville, VA
    edited August 2003
    1.) Get gromacs.

    2.) Delete the core and let it auto download another one. See if that helps any.
Sign In or Register to comment.