Dual channel setting question! :O

LIQuidLIQuid Raleigh, NC
edited August 2003 in Hardware
Hey guys,

My second stick of twinmos pc3200 will be here in a couple hours via fedex ( <3 )

And im just wondering what i need to do to make it run in dual channel. Do i put it in the bank that is on the far right, the one separated from the other 2?

Also, is there any jumper or bios setting i need to set, or will it just kick in automatically :D


thanks, :respect:

Comments

  • ThraxThrax 🐌 Austin, TX Icrontian
    edited August 2003
    Far left slot, far right slot.

    Automatic.

    Don't expect much of an improvement. I don't use dual channel to allow a few MHz higher on my FSB.
  • TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
    edited August 2003
    Thrax suggestion is right. Dual 205 fsb gives the same bandwidth in Sandra as 215 in single at same timings. At least on mine. With thew 2.0 board, if you have a 266fsb cpu, mod it to default at 333 to be able to add more fsb stable. Then you will se how much Dual channel helps.
  • LIQuidLIQuid Raleigh, NC
    edited August 2003
    im at 220 right now... you think i will be able to stay there with dual channel?
  • TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
    edited August 2003
    I dont see why not really. Can you read the batch code of the 2 memory sticks? Do they differ totally?
  • LIQuidLIQuid Raleigh, NC
    edited August 2003
    yay, i got both sticks in and they are both running great in dual channel :O

    2/2/3/5 :D 220FSB
  • TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
    edited August 2003
    FANTASTIC!!!

    Give us the bandwidth!
Sign In or Register to comment.