Anyone here familiar with P4C800 mobos?
I recently did the vcore droop mod on my p4c800-e dlx. I will admit, my o/c has increased, but I am still experiencing a severe drop in vcore. 1.6v in BIOS gives me 1.645 in Asus probe, on full load it drops to approx 1.6v. I tested resistances from 24k to 35k and the drop did not vary much. I used the "2 dot" version of the mod. Any suggestions?
Before mod: Max stable O/C 233 FSB, 3.73GHz / Max boot 3.85GHz
After mod: Max stable O/C 239 FSB, 3.82GHz / Max boot 4.1GHz (255 fsb)
I have a good feeling this chip can stablize higher than 3.8. Everytime prime fails, or the system becomes unstable I see the voltage drop.
Oh and my ram is twinx-4400C25, not the mushkin.
Before mod: Max stable O/C 233 FSB, 3.73GHz / Max boot 3.85GHz
After mod: Max stable O/C 239 FSB, 3.82GHz / Max boot 4.1GHz (255 fsb)
I have a good feeling this chip can stablize higher than 3.8. Everytime prime fails, or the system becomes unstable I see the voltage drop.
Oh and my ram is twinx-4400C25, not the mushkin.
0