Time to oc this! HELP!

GnomeWizarddGnomeWizardd Member 4 LifeAkron, PA Icrontian
edited February 2005 in Hardware
Ok this is a new area for me OCing a A64.

DFI Lanparty NF3 250gb
A64 3400+
1 gig kingston hyper x 3700


Now what settings sould i be able to get out of this thing SAFELY

Comments

  • TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
    edited February 2005
    That memory, any idea what it is "under the hood"?
    Start by setting ldt to 3, htt to 230 and timings should be cas 2.5,3,3,7. We'll change that later if we can. Drop the multi and run memtest at each setting. There are tons of more settings in that bios. Try following this guide i made.

    http://www.short-media.com/forum/showthread.php?t=27411
  • edcentricedcentric near Milwaukee, Wisconsin Icrontian
    edited February 2005
    Follow the Mac rules.
    First lower the multiplier and find the limit of your memory/mobo. I know that this is a pain, but it is good for you. Slowly bumping up fsb, raising voltage and lowering timings until you find the top.
    Then you can start bringing the multiplier back up and raising the cpu voltage.

    With a single stick of memory people have been hitting 300fsb, with two sticks they manage 275 or so.
    http://anandtech.com/mb/showdoc.aspx?i=2198&p=6

    Happy Hunting
Sign In or Register to comment.