Radeon 9600 and Cataclyst not agree

mozartella

Ok this is easy, each time I try ti install the news Catalyst for my Radeon, I receu-ive message like Cli, exe not workin... I sended a report to ATI, followed their advise, but not to prevail, this is the same result...any idea?? thanks
and my puter a P4 1032 RAM, 3.03 gig true Intel


Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: ATI RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_7C29174B&REV_00
Display Memory: 256.0 MB
Current Mode: 1024 x 768 (32 bit) (75Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6512 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 1/20/2005 04:25:56, 223744 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 1/20/2005 04:25:36, 965632 bytes
Device Identifier: {D7B71EE2-0210-11CF-8B6D-235CA1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x7C29174B
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK

profdlp

I have a 9600 (made by Sapphire) and had the exact same problem. What I did to solve it was to go to:

Control Panel>>Add or Remove Programs>>ATI Catalyst Control Center>>Change (not "Remove")>>Repair

Fixed me right up.

mozartella

Rational Anarchime, thanks , going to try again

always_broke

I thinks cli.exe is related to the ATI Control Panel (note, not the Windows Control panel) and requires the installation of MS .net runtime files to run properly,otherwise it fails to initialize and gives the error you name. You can download it from Microsoft from here