3200 venice @2.72

MAGICMAGIC Doot DootFurniture City, Michigan Icrontian
edited June 2005 in Hardware
shuttle sn95g5
a64 3200 venice @ 2.72 1.65v 39*c
1gb ocz plat rev2 2.5/4/4/8 2.8v
47*c case
859d7598.jpg
I tried dropping the multiplier to see if the fsb could go any higher and it still capped at 275, i could get it to 280 at 1.7v but i didnt like having it that high, so i backed it down to 1.65v and 172fsb and its doing good.
Its stable here and the temps havent fluxed at all so unless anyone has any ideas as to how i could get it higher, itll stay here.

Comments

  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2005
    prime95 crashed after 8 1/2 hours so i backed it down to 2.7
  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2005
    3dmark05.jpg
    3d03.jpg
    6800gt@ 415 1130 i dunno why i couldnt break 5k in 05..
  • GrayFoxGrayFox /dev/urandom Member
    edited June 2005
    Cool nice overclock

    Btw you can probably get more out of the chip if you rase the voltage more.
  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2005
    i just noticed that cpuz is posting my cpu at 1.6v and the bios its at 1.65, the shuttle only goes up to 1.7v i think
  • csimoncsimon Acadiana Icrontian
    edited June 2005
    you're doing just fine where you are ...I wouldn't expect any more out of that chip ...2.7 is what others are getting and it's plenty. nice job! :thumbsup:

    and it's folding right? :csimon::thumbsup:
  • MAGICMAGIC Doot Doot Furniture City, Michigan Icrontian
    edited June 2005
    csimon wrote:
    and it's folding right? :csimon::thumbsup:
    now it is :thumbsup:
  • lemonlimelemonlime Canada Member
    edited June 2005
    I would not recommend putting any more than ~1.6 volts through an 90nm A64. They really don't react as well as the socket A platform did to vcore, especially with 90nm chips. I actually got my best overclocks with 1.45volts.

    I'm not too sure how well those venice cores react with high memory frequencies, but give it a shot with a divider and 2T timing to see if you get any more juice out of it. My guess is you should be able to break 2.8 with less stress on the memory controller. 2.7 is still an incredable clock though! Bet it feels really quick.

    Awesome shuttle btw ][V][AGIC! Glad to see you finally got her hauling arse :D
Sign In or Register to comment.