2100 tbred b´s anyone?

TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
edited June 2003 in Hardware
I´d like to compare a little. Mine HATES voltages over 2.1. This thing won´t even get into windows on that voltage, no matter what speed i have on the cpu.

This is what i have got so far: It´s a 03/02 brown chip.

Cpu.jpg

It´s not a contest or so, i just want to compare a little since i think my chip acts a little weird.

Oh btw, the hot board is because i dont have any casefans on. With a front 120mm fan, it get lowered by 4 or 5c, and so do the cpu.

Comments

  • Bad_KarmaBad_Karma The Great White North
    edited June 2003
    What the hell are you cooling that beast with?
    Great Overclock! Too bad the 2.1 is the top.:thumbsup:
  • TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
    edited June 2003
    Im using a Maze 2 Block, Aqua block on the radeon, and a dual 120mm Radiator. Nothing fancy.

    Last time i checked, 2.4 wasn´t fully stable, but it seem to be now, i have been folding gromacs for 24 hours.

    Thanks!
  • Omega65Omega65 Philadelphia, Pa
    edited June 2003
    Nothing Fancy he says....

    DUAL 120mm Radiator, Water cooled Vid card and CPU....

    :D
  • TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
    edited June 2003
    I think this cpu can do this an a good airsetup as well actually.
    Gromacs and Prime 95 for 48 hours now. I think i have found the sweetspot on 1.90-1.92 V on this puppy.
  • Juggah0Juggah0 Oshkosh WI
    edited June 2003
    1700+ Tbred B JIUHB 0310, 2.13ghz @ stock vcore. and if a dual 120mm rad is fancy i guess my machine is roxor...


    Nick
  • FormFactorFormFactor At the core of forgotten
    edited June 2003
    I got my 2100 tbred b to that speed, but it would crash on the cpu test of 3dmark. So i dropped it to 2300 mhz with a 200 fsb...runs stable as hell. a little warm at just under 60 C . Its been foldin for months now without a reboot.

    this is on pc3200 ram. kingston hyperx.
  • FormFactorFormFactor At the core of forgotten
    edited June 2003
    I got my 2100 tbred b to that speed, but it would crash on the cpu test of 3dmark. So i dropped it to 2300 mhz with a 200 fsb...runs stable as hell. a little warm at just under 60 C . Its been foldin for months now without a reboot.

    this is on pc3200 ram. kingston hyperx.
  • muddocktormuddocktor
    edited June 2003
    Mack, your pic went south so I can't see what your oc is.

    My 2100 is an AIUHB 0301MPMW and the highest stable overclock I've gotten out of it is 185X13 at 1.85v vcore air cooled. Actual vcore as per MBM was 1.92v. I generally run it at around 2250-2300 MHz and 1.75v vcore.
  • TheLostSwedeTheLostSwede Trondheim, Norway Icrontian
    edited June 2003
    Mud, the pic is up again. It seems that your cpu oc much better.

    Why dont you put that watercooling on the 2100 instead?
  • panzerkwpanzerkw New York City
    edited June 2003
    pfft I need to try raising the voltage to around 1.85 -1.90. Windows refuses to complete boot at 200 FSB x 11 on my 2100. 190 x 11 works though.
Sign In or Register to comment.