WU issue! Not sending!

Sledgehammer70Sledgehammer70 California Icrontian
edited January 2006 in Folding@Home
I checkout my rigs today to make sure they were all folding and I noticed why my points have not been sent.... all my work Pc's seem not to beale to send work out, there are unable to connect to servers. is there a way to change what port they use to send out items? or is there away i can transfer the 40+ WU's to a tower that can send them?



14:39:14] + Attempting to send results
[14:39:15] - Couldn't send HTTP request to server
[14:39:15] + Could not connect to Work Server (results)
[14:39:15] (171.64.122.133:8080)
[14:39:15] - Error: Could not transmit unit 04 (completed January 18) to work server.
[14:39:15] Keeping unit 04 in queue.


I have this message on all my rigs! I guess if there is away to send it out via port 21 or something it would work.. Ithe IT dept says they wont open any ports for me.. I can only use the ones given!

Comments

  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    I tried something Prof said awhile ago by changing the port to 80 in the client.cfg file... but now i get this!

    [19:31:09] + Attempting to send results
    [19:31:10] - Couldn't send HTTP request to server
    [19:31:10] + Could not connect to Work Server (results)
    [19:31:10] (171.65.103.100:8080)
    [19:31:10] Could not transmit unit 09 to Collection server; keeping in queue.
    [19:31:18]
    [19:31:18] Folding@home Core Shutdown: CLIENT_DIED

    It still reads 8080???? and the ctf file says 80!
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    How Do I do this?

    You may want to tweak one thing which had helped others. Even if you do not use IE but try it...

    If you currently using "Use IE Settings" -- Try change it to "No Proxy". Or something like that.

    1) Use IE Settings
    2) No Proxy
    3) Proxy with additional information
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    Any help would be good guys I now have WU's stacking up on each other!
  • profdlpprofdlp The Holy City Of Westlake, Ohio
    edited January 2006
    Sledgehammer70 wrote:
    ...
    [19:31:10] + Could not connect to Work Server (results)
    [19:31:10] (171.65.103.100:8080)...
    Looks like that server is heavily loaded at the moment. (See the NETLOAD figure.)

    I'd try and hang tight for a bit. The same thing happened to me earlier this week. Once the server caught up the WU's went out just fine. :)
    [19:31:18] Folding@home Core Shutdown: CLIENT_DIED
    :wtf:

    That's a new one on me... :confused:
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    yeah I have no idea what it means. So ther server could have been backup up for 3 days?
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    If that is ture when it opens up i will have like a 300,000 point day!
  • profdlpprofdlp The Holy City Of Westlake, Ohio
    edited January 2006
    When was the last time you rebooted the machines?
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    about 2 hours ago!
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    every single Console has 1 or 2 WU's no backup waiting to be sent! I even have 1 with 3 Wu's in Queue
  • csimoncsimon Acadiana Icrontian
    edited January 2006
    try making a shortcut to the client you want to send from and add the -sendall flag. Run the shortcut and see if that works. It's the manual way of sending wu's in case you are unaware.
    If it doesn't send then that just means the client is too busy or isn't accepting yet.

    Also, whatever flag or non-flag you are using on that client if you change it it will receive and send to a different server. Like if you're using -advmehtods then take it out til things get back on track ...or if you're not using it try adding it.
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    Launch directory: C:\Mat's Misc\Fold1
    Executable: C:\Mat's Misc\Fold1\FAH502-Console.exe
    Arguments: -send x

    [15:13:43] - Ask before connecting: No
    [15:13:43] - User name: Sledgehammer70 (Team 93)
    [15:13:43] - User ID: 28FB91A62264BA4C
    [15:13:43] - Machine ID: 1
    [15:13:43]
    [15:13:43] Loaded queue successfully.
    [15:13:43] Attempting to return result(s) to server...


    [15:13:43] + Attempting to send results
    [15:13:44] - Couldn't send HTTP request to server
    [15:13:44] + Could not connect to Work Server (results)
    [15:13:44] (171.64.122.70:8080)
    [15:13:44] - Error: Could not transmit unit 00 (completed January 20) to work server.


    [15:13:44] + Attempting to send results
    [15:13:45] - Couldn't send HTTP request to server
    [15:13:45] + Could not connect to Work Server (results)
    [15:13:45] (171.65.103.100:8080)
    [15:13:45] Could not transmit unit 00 to Collection server; keeping in queue.
    [15:13:45] - Failed to send unit 00 to server

    Folding@Home Client Shutdown.
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    well i tired send manually, I tired to -confogonly and check all ym settings, I am not proxied, I am not on Internet explore settings... I dont know what the hell is going on! the server seems to be running fine that I can see! any other help is much appricated....
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    I just tried changing advanced methods with no luck... it looks liek it is already trying to upload to more than 1 server!

    15:24:42] Folding@Home Double Gromacs Core
    [15:24:42] Version 1.72 (February 4, 2005)
    [15:24:42]
    [15:24:42] Preparing to commence simulation
    [15:24:42] - Looking at optimizations...
    [15:24:42] - Files status OK
    [15:24:43] - Expanded 848125 -> 3362033 (decompressed 396.4 percent)
    [15:24:43]
    [15:24:43] Project: 988 (Run 1143, Clone 0, Gen 1)
    [15:24:43]
    [15:24:43] Assembly optimizations on if available.
    [15:24:43] Entering M.D.
    [15:24:55] - Couldn't send HTTP request to server
    [15:24:55] + Could not connect to Work Server (results)
    [15:24:55] (171.64.122.70:8080)
    [15:24:55] - Error: Could not transmit unit 00 (completed January 20) to work server.


    [15:24:55] + Attempting to send results
    [15:24:56] - Couldn't send HTTP request to server
    [15:24:56] + Could not connect to Work Server (results)
    [15:24:56] (171.65.103.100:8080)
    [15:24:56] Could not transmit unit 00 to Collection server; keeping in queue.


    [15:24:56] + Attempting to send results
    [15:24:57] - Couldn't send HTTP request to server
    [15:24:57] + Could not connect to Work Server (results)
    [15:24:57] (171.64.122.70:8080)
    [15:24:57] - Error: Could not transmit unit 00 (completed January 20) to work server.


    [15:24:57] + Attempting to send results
    [15:24:58] - Couldn't send HTTP request to server
    [15:24:58] + Could not connect to Work Server (results)
    [15:24:58] (171.65.103.100:8080)
    [15:24:58] Could not transmit unit 00 to Collection server; keeping in queue.
    [15:25:03] (Starting from checkpoint)
    [15:25:03] Protein: p988_fkcomp_pop
  • ShortyShorty Manchester, UK Icrontian
    edited January 2006
    Are you absolutely sure that NOTHING on the network has changed.. that could block connections to stanford...?

    I have seen this before but only when one of two things happen...

    The stanford servers were out... or
    Something is blocking connections to stanford.
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    Is there a way to check? IT might have blocked up a connection... but usually they would let me know!
  • MiracleManSMiracleManS Chambersburg, PA Icrontian
    edited January 2006
    Mine wasn't sending earlier this morning/last night. It just recently sent, so I'm not entirely sure it was you.
  • profdlpprofdlp The Holy City Of Westlake, Ohio
    edited January 2006
    NETLOAD tells how busy the server is by netstat (i.e. how many current connections the server is handling). Too many connections (eg more than 20-30) means that the server is heavily loaded.
    Sledgehammer70 wrote:
    171.64.122.70 --> NETLOAD = 45
    171.65.103.100 --> NETLOAD = 76

    Unless something has changed at your end, it seems likely that it's just a case of the servers at Stanford getting hammered at the moment. :)
  • Sledgehammer70Sledgehammer70 California Icrontian
    edited January 2006
    Well Shorty and I did a little network testing to find that all ports and connections to Stanford have been terminated or blocked! From my end! I do know my IT dept has been doing updated and upgrades and I think during this time they have increased security! So as of now all my work towers are offline

    NOooooooooooooooooooooooooooo!!!! As much as that hurts me to say it.

    I am going to try to work with my IT dept in fixing this matter, but when they gave me the approval they said I can run the program all I want as long as it works with current security setups. I guess what they meant to say was... you can do it, but if we have to adjust anything your out of luck!

    But there is a bright side... is till have 10 comps at home folding away! so .... Sledgehammer70 will slow drop from the ranking until I can get this resolved!

    Now the real question!


    Is there a way to upload WU’s from a different comp? like save all the ones i have and upload them from a comp at home?
  • csimoncsimon Acadiana Icrontian
    edited January 2006
    There is ...ask muddocktor. I'm sure a few others have done it as well.
Sign In or Register to comment.