Need help from anyone with an abit nf7-s
FormFactor
At the core of forgotten
could someone with the above mentiond (abit nf7-s) board please do me a solid and post some info for me? Just follow the instructions below.
Open up MSInfo32.exe (Start>Run, Type "MSinfo32.exe" w/o Quotes, Press OK), with MSinfo open (Should Look Something Like This) Click the + next to "Components", Click the + next to "Storage" Now Click on scsi and you Something That looks Like This:
Name Serial ATA Controller Manufacturer Status OK PNP Device ID PCI\VEN_2211&DEV_4433&SUBSYS_31491106&
I/O Port 0x00006655-0x00006662
I/O Port 0x00000000-0x00000003
I/O Port 0x00008877-0x00008884
I/O Port 0x00000000-0x00000003
I/O Port 0x00000000-0x0000000F I/O Port 0x00000000-0x000000FF IRQ Channel IRQ 20
My msinfo32 is not working, but if someone could post the i/0 port range hex values i would gretly apreciate it!
Im trying to flash a samsung x360 drive, and need those hex values to edit makeflash to work with my chipset.
Ive tried everything to get msinfo32 to work but i cant... something to do with windows help center not being installed with my custom minimal build of xp.
Anyways, if anyone could help out i would really apreciate it!
thanks fellaz!
Open up MSInfo32.exe (Start>Run, Type "MSinfo32.exe" w/o Quotes, Press OK), with MSinfo open (Should Look Something Like This) Click the + next to "Components", Click the + next to "Storage" Now Click on scsi and you Something That looks Like This:
Name Serial ATA Controller Manufacturer Status OK PNP Device ID PCI\VEN_2211&DEV_4433&SUBSYS_31491106&
I/O Port 0x00006655-0x00006662
I/O Port 0x00000000-0x00000003
I/O Port 0x00008877-0x00008884
I/O Port 0x00000000-0x00000003
I/O Port 0x00000000-0x0000000F I/O Port 0x00000000-0x000000FF IRQ Channel IRQ 20
My msinfo32 is not working, but if someone could post the i/0 port range hex values i would gretly apreciate it!
Im trying to flash a samsung x360 drive, and need those hex values to edit makeflash to work with my chipset.
Ive tried everything to get msinfo32 to work but i cant... something to do with windows help center not being installed with my custom minimal build of xp.
Anyways, if anyone could help out i would really apreciate it!
thanks fellaz!
0
Comments
I should mention that u have to have the onboard sata controller enabled in your BIOS for it to show up in msinfo32.
Thank you so much Hawk! Ill put it to the test tonight.
Thanks again!
Glad I could help.
Let me know if it works.
Thanks again Hawk!
That's great. Glad you got it figured out FF.
Glad to help.