- Fix: Revision F Turion/Turion X2 detected wrong.
- Fix: Core Temp fully loads one core on a dual core AMD CPU.
- Fix: Core Temp crashes on Dual Core Opteron 200 series systems.
- Fix: Core Temp misdetected certain Dual Core Opteron CPUs.
- Fix: Must set Core Temp to run as Administrator in Vista.
- Fix: Can't see Core Temp GUI if Core Temp was last closed minimized.
- Fix: C2D L2 rev. report very low temperatures. (Tjmax to 100C)
- Fix: Core Temp reported wrong temps after a while. (Driver conflict)
- Fix: Core Temp reported Max VID on Intel CPUs. (Now shows current)
- Add: Show temperature in System tray.
- Add: Manual refresh option by pressing F5 or "File" Menu.
- Add: Show "Delta to Tjunction" temperature for Core 2 CPUs.
- Add: Support for latest Intel and AMD CPUs.
- Add: Minimize/Restore option in system tray icon right click.
- Add: Save last window position.
- Add: Prevent 2 instances of Core Temp from launching.
- Change: Rewritten Intel CPU recognition code.
- Change: Core 2 Duo codename change to Conroe-2M from Allendale.
- Change: Pop up bubble-window with temperatures removed.
- Change: Not Beta status anymore.
We've had spammers sneak back and throw a link to their crap into a post after they think no one will notice. Because of this we've been forced to limit the time period for editing a post.
Why is the new version of Core Temp not showing me the TDP and TCaseMax readings? The old version .94 beta is showing me these readings?
ps..I forgot to add also that when I ran it it said something about driver not found and then went into an endless loop and I had to reboot to close it. I will try to redownload it again...
Can you please post a screenshot of Core Temp and A64TCaseMax screenshot side by side for my comparison? Also a Register Dump (from CPUz) would be usefull as well.
If anyone is having problems with Core Temp crashing on them, please look at the appropriate thread and post there your problem and system spec. I think this way it will be very effective at getting to the bugs faster.
Can you please post a screenshot of Core Temp and A64TCaseMax screenshot side by side for my comparison? Also a Register Dump (from CPUz) would be usefull as well.
It took me a while to figure out how to post a screenshot but here they are. "]This [/URL]is core temp .94beta and "]this [/URL]is core temp .95
Version 0.95.4 - 22nd August, 2007 - Fix: Core Temp causes restarts/BSODs on start.
- Fix: Core Temp causes hard shutdowns on some AMD systems.
- Fix: System tray icons are black squares on less than 32bit desktops.
- Fix: Some other minor bugs fixed.
Could someone please please edit the first post and fix the links? As I can't edit the post. www.thecoolest.zerobrains.com should be changed to www.alcpu.com
The old URL is gone now.
- Add: System tray icons configuration.
- Add: Support for Intel's latest CPUs.
- Add: ClearType font support.
- Add: Time\Date column to the log file.
- Add: Always on top option.
- Fix: Core Temp does not proprerly display temperature and CPU select fields.
- Fix: Log file layout.
- Fix: Hide\Show does not properly Minimize\Restore window.
- Fix: Core code names aren't properly detected. (Intel)
- Fix: Incorrect\Missing CPU rating when not using stock\maximum multiplier. (Intel)
- Fix: Wrong CPU clock is reported when using EIST\non-maximum multiplier. (Intel)
- Fix: Wrong detection of Merom based CPUs.
- Fix: Single core Athlon 64s and Semprons reading -49C constantly. (Rare)
- Fix: C2D M0 rev. report very low temperatures. (Tjmax to 100C)
- Fix: Layout and display of tool tip text in the system tray. (Now shows a core per line)
- Change: Log the start and end of a session even if logging is disabled.
- Change: Settings and Systray settings windows appear in center of main window.
- Change: Rename "Tjunction" field to "Tj. Max" to make things clearer.
- Add: Support for *Phenom and "Barcelona" Opteron.
- Add: Support all K8 processors.
- Add: Support Intel Celeron M 500 series.
- Fix: Wrong CPU speed on Intel ES chips.
- Fix: Fix M0 Tjunction max detection.
- Fix: Intel QX6850 CPU's rating shown as QX6650.
- Fix: Intel E6550 CPU's rating shown as E6650.
- Fix: Intel Celeron M 400 series detected incorrectly.
- Fix: AMD Opteron for Socket AM2 reported as Santa Rosa instead of Santa Ana.
- Add: Vista x64 support - All drivers are now digitally signed! - Add: Logitech G15 keyboard support - see ReadMe!.txt for details.
- Add: Support 45nm LGA775 Xeon series.
- Fix: Opaque background in system tray wasn't 16x16 pixels.
- Fix: Yonah based CPUs incorrectly detected.
- Fix: 1333FSB Dual Core Conroe based Xeon incorrectly detected.
- Fix: Dreaded cycle of "Driver can't load" messages if driver failed to load.
- Fix: Socket AM2 Athlon-FX was not recognized.
- Fix: Phenom did not display proper temperature.
- Fix: Phenom randomly reports 255C (value ignored).
- Fix: Phenom displays more than a single system tray icon per CPU.
- Fix: Phenom 1/4 multipliers rounded improperly.
- Change: C° and F° now will display °C and °F accordingly.
- Fix: Core Temp sometimes crashes when another program tries to access the log file. - Still needs further testing.
- Add: Show load percentage per core.
- Add: Adjustable Tj.Max value via *.INI file.
- Add: Option to start Core Temp with Windows.
- Add: Support new Intel Mobile processors
- Change: Maximum logging interval is now 99999ms instead of 9999ms.
- Change: Log file layout. Shows current temperature, high\low temperature, core load, CPU speed.
- Fix: Core Temp sometimes crashes when another program tries to access the log file. - Still needs further testing.
- Add: Show load percentage per core.
- Add: Adjustable Tj.Max value via *.INI file.
- Add: Option to start Core Temp with Windows.
- Add: Support new Intel Mobile processors
- Change: Maximum logging interval is now 99999ms instead of 9999ms.
- Change: Log file layout. Shows current temperature, high\low temperature, core load, CPU speed.
T_C, the new version is giving a funky reading for the processor in my laptop. It's a T7400, but Core Temp is calling it a "Mobile Core 2 Duo L71200". Weird, huh?
Hmm, does that happen every time you start Core Temp or was it a one time thing?
If you happens all the time, could you also send me a txt dump file from CPU-z?
Hmm, does that happen every time you start Core Temp or was it a one time thing?
If you happens all the time, could you also send me a txt dump file from CPU-z?
- Fix: Incorrect recognition of 45nm Mobile Intel CPUs.
- Fix: CPU temperature not displayed in Core Temp window on Phenom CPUs (0.98 and 0.98.1).
- Add: Shared memory - developers now have access to Core Temp data.
- Add: Register dump to text file function.
- Add: Preliminary Atom (Silverthorne) support - Untested.
Comments
- Fix: Revision F Turion/Turion X2 detected wrong.
- Fix: Core Temp fully loads one core on a dual core AMD CPU.
- Fix: Core Temp crashes on Dual Core Opteron 200 series systems.
- Fix: Core Temp misdetected certain Dual Core Opteron CPUs.
- Fix: Must set Core Temp to run as Administrator in Vista.
- Fix: Can't see Core Temp GUI if Core Temp was last closed minimized.
- Fix: C2D L2 rev. report very low temperatures. (Tjmax to 100C)
- Fix: Core Temp reported wrong temps after a while. (Driver conflict)
- Fix: Core Temp reported Max VID on Intel CPUs. (Now shows current)
- Add: Show temperature in System tray.
- Add: Manual refresh option by pressing F5 or "File" Menu.
- Add: Show "Delta to Tjunction" temperature for Core 2 CPUs.
- Add: Support for latest Intel and AMD CPUs.
- Add: Minimize/Restore option in system tray icon right click.
- Add: Save last window position.
- Add: Prevent 2 instances of Core Temp from launching.
- Change: Rewritten Intel CPU recognition code.
- Change: Core 2 Duo codename change to Conroe-2M from Allendale.
- Change: Pop up bubble-window with temperatures removed.
- Change: Not Beta status anymore.
*PS: Why can't I edit the first post?
I updated your top post with the new information.
ps..I forgot to add also that when I ran it it said something about driver not found and then went into an endless loop and I had to reboot to close it. I will try to redownload it again...
What CPU?
Intel Thread
AMD Thread
It took me a while to figure out how to post a screenshot but here they are.
- Fix: Core Temp causes restarts/BSODs on start.
- Fix: Core Temp causes hard shutdowns on some AMD systems.
- Fix: System tray icons are black squares on less than 32bit desktops.
- Fix: Some other minor bugs fixed.
- Add: Support new Intel CPUs.
www.thecoolest.zerobrains.com should be changed to www.alcpu.com
The old URL is gone now.
- Add: System tray icons configuration.
- Add: Support for Intel's latest CPUs.
- Add: ClearType font support.
- Add: Time\Date column to the log file.
- Add: Always on top option.
- Fix: Core Temp does not proprerly display temperature and CPU select fields.
- Fix: Log file layout.
- Fix: Hide\Show does not properly Minimize\Restore window.
- Fix: Core code names aren't properly detected. (Intel)
- Fix: Incorrect\Missing CPU rating when not using stock\maximum multiplier. (Intel)
- Fix: Wrong CPU clock is reported when using EIST\non-maximum multiplier. (Intel)
- Fix: Wrong detection of Merom based CPUs.
- Fix: Single core Athlon 64s and Semprons reading -49C constantly. (Rare)
- Fix: C2D M0 rev. report very low temperatures. (Tjmax to 100C)
- Fix: Layout and display of tool tip text in the system tray. (Now shows a core per line)
- Change: Log the start and end of a session even if logging is disabled.
- Change: Settings and Systray settings windows appear in center of main window.
- Change: Rename "Tjunction" field to "Tj. Max" to make things clearer.
Happy new year to everyone
muddocktor: Thanks
- Add: Support for *Phenom and "Barcelona" Opteron.
- Add: Support all K8 processors.
- Add: Support Intel Celeron M 500 series.
- Fix: Wrong CPU speed on Intel ES chips.
- Fix: Fix M0 Tjunction max detection.
- Fix: Intel QX6850 CPU's rating shown as QX6650.
- Fix: Intel E6550 CPU's rating shown as E6650.
- Fix: Intel Celeron M 400 series detected incorrectly.
- Fix: AMD Opteron for Socket AM2 reported as Santa Rosa instead of Santa Ana.
*Please read this.
- Add: Vista x64 support - All drivers are now digitally signed!
- Add: Logitech G15 keyboard support - see ReadMe!.txt for details.
- Add: Support 45nm LGA775 Xeon series.
- Fix: Opaque background in system tray wasn't 16x16 pixels.
- Fix: Yonah based CPUs incorrectly detected.
- Fix: 1333FSB Dual Core Conroe based Xeon incorrectly detected.
- Fix: Dreaded cycle of "Driver can't load" messages if driver failed to load.
- Fix: Socket AM2 Athlon-FX was not recognized.
- Change: Core Temp layout on a Phenom.
- Fix: Phenom did not display proper temperature.
- Fix: Phenom randomly reports 255C (value ignored).
- Fix: Phenom displays more than a single system tray icon per CPU.
- Fix: Phenom 1/4 multipliers rounded improperly.
- Change: C° and F° now will display °C and °F accordingly.
- Fix: Core Temp sometimes crashes when another program tries to access the log file. - Still needs further testing.
- Add: Show load percentage per core.
- Add: Adjustable Tj.Max value via *.INI file.
- Add: Option to start Core Temp with Windows.
- Add: Support new Intel Mobile processors
- Change: Maximum logging interval is now 99999ms instead of 9999ms.
- Change: Log file layout. Shows current temperature, high\low temperature, core load, CPU speed.
Very nice additions, many thanks as always!
Speaking of which, I ran it on mine and I think there is a glitch in the Delta Tjunction Max:
Looks like it should be about 40F. At work right now & will post it later in your website if you prefer.
If you happens all the time, could you also send me a txt dump file from CPU-z?
Thanks
Yeah, it happens every time I open Core Temp.
OK, I'll attach it to this post for you, T_C.
http://www.alcpu.com/forums/viewtopic.php?t=405
- Fix: Incorrect recognition of 45nm Mobile Intel CPUs.
- Fix: CPU temperature not displayed in Core Temp window on Phenom CPUs (0.98 and 0.98.1).
- Add: Shared memory - developers now have access to Core Temp data.
- Add: Register dump to text file function.
- Add: Preliminary Atom (Silverthorne) support - Untested.