My OC results - XP 2100+

W00pAss

I'm posting these results for discussion, they seem "out of line" with current thinking (Or did I get a "dream CPU"?).

System: Abit KD-7E M0b0

Memory: 512mb 2700 DDR (333mhz rated).

CPU: AMD Thoroughbred 2100+ XP (It may be the "B" core, but I'm not sure right now, will have to check that)

Now for the cool part I have been able to get this baby to run stable at 2.145Ghz! I am running at 15x multiplier, .75v additional on the core and .5v on the memory (with heat sinks and a fan) I have also bumped the FSB up to 143. When it boots up the BIOS reports it as a Thoroughbred 2600!

I am playing some more, but cannot get it above 2.1Ghz yet without stability problems...

citrixmeta

nice!!

what heatsink and fan are you using?
why type (brand) of ram is it?

Nebulous

Not too shabby. I've had my Tbred b's 2.4, 2.5,2.6 and even close to 2.7Ghz, but then i'm a powerfreak

2.1Ghz is a nice oc. We'll need some better info on your setup.

LiLbRo

i ran my 650 duron at 1.1 for like a year wiht no problems at all.. then i got a new proc

stoopid

What voltage are you running at?? I think you meant .075v NOT .75v ... ???

That's a good overclock on air. People like nebulous get much higher with watercooling and other high-end cooling solutions...

fatcat

um...

drop the multi to 13x, change the FSB to 167, change divider to 5:2:1 in bios, then start overclocking the FSB upward

u have DDR333 mem and a KT333 mobo so no need to run anything below 167 FSB...unless u got a locked proc

400mhz is a nice O/C to begin with, dont forget to adjust vcore and vdimm accordingly

W00pAss

Memory: Kingston KVR333 PC2700 333mhz DDR ram

Fan: Vantec Aeroflow 5600 rpm fan with copper core and Artic Silver.

Abit KD7 MOBO (This baby ROCKS! I can do 1.95v on the CPU from BIOS!)

Video Card is a GeForce2 MX200 32mb (pretty vanilla...)

That's about it...