Benchmarking teh Athlon 64

ZuntarZuntar North Carolina Icrontian
edited August 2004 in Hardware
I have been overclocking, and running some benchies. I have come to some road blocks, and need to see what you guys think and PLEASE offer you advice.

System Specs are in my sig. :cool: There are several important details that you must know.....

1. My new rig currently lives in the garage (unairconditioned) while I finish my bonus room. I'm doin this myself so im spending alot of time workin on the room ,but almost done.
2. I think my biggest battle so far is my Graphics card. It tends to wigg out on me, locking up and such. I can push the cpu/mem quite far as long as i don't bench the graphics card.
3. My mem cycle time (Tras) is now set 10.

Heres some of the results..

AquaMark score = 48256 (CPU:10023, GFX:6354)
3DMark 2001SE = 18083
3DMark 2003 = 5614

Comments

  • citrixmetacitrixmeta Montreal, Quebec Icrontian
    edited August 2004
    whats ur vdimm at?
  • ZuntarZuntar North Carolina Icrontian
    edited August 2004
    2.7v, why?

    Muskin specs for these modules is 2.6V to 2.8V, but othe website under mainboard qualification they state " Black level modules may require DDR voltage of 2.8v". It does not state anywere whether or not my mem is black level.
    here is there bench for the 256Mb x 2 modules @ 227Mhz FSB
  • citrixmetacitrixmeta Montreal, Quebec Icrontian
    edited August 2004
    INCREEAASSEEE!!! :D

    you must have a nice chip (memory) there if you hit 228@2.7v
  • ZuntarZuntar North Carolina Icrontian
    edited August 2004
    I was editing when you last posted citrix, does that help?
  • citrixmetacitrixmeta Montreal, Quebec Icrontian
    edited August 2004
    nono, you got great mem there, you need to bring up ur vdimm, ur safe until 3.3v.
  • ZuntarZuntar North Carolina Icrontian
    edited August 2004
    Actualy, the sandra score for the mem bandwidth was done at like...... 243 FSB 7X multiplier, 3x hyperthreading @ 2.7 volts. My norm is 10x multiplier, 4x hyperthreading.
  • ZuntarZuntar North Carolina Icrontian
    edited August 2004
    Well, my mobo only goes to 2.85V. :confused: I have more questions about OCing but i'll post that to the OC section.
  • GnomeWizarddGnomeWizardd Member 4 Life Akron, PA Icrontian
    edited August 2004
    if u need to get ahold of me on AIM or msn send me a pm for a time
  • ZuntarZuntar North Carolina Icrontian
    edited August 2004
    Thanks chief, been busy, but i'll get there soon, I hope.
Sign In or Register to comment.