Microcode error help needed pls
Hi My company have a number ibm 6338 celerons 533 desktops using 810 chipset 100 bus . I upgraded it to a p3 800 /133 processors and it gave me the "microcode" error PRESS F1 ; which i did & works well in windows. I wonder if any of you nice guys out there could tell me how to tweak the bios so it would not ask me to press F1 at boot up & go straight to booting windows?
Also , it is running now at P3 600 reported by the bios at 100 bus speed ( underclock) which is fine and a far improvement from the orig celerons .
I have flashed with IBM latest bios upgrade with NO avail. My processor step code is 068A which is not in the IBM Bios *.bin file which i have checked with a hex editor.
Any help is much appreciated.
Latest ibm bios page : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4HAMXK
Ken
Also , it is running now at P3 600 reported by the bios at 100 bus speed ( underclock) which is fine and a far improvement from the orig celerons .
I have flashed with IBM latest bios upgrade with NO avail. My processor step code is 068A which is not in the IBM Bios *.bin file which i have checked with a hex editor.
Any help is much appreciated.
Latest ibm bios page : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4HAMXK
Ken
0