"CPU is unworkable or has been changed...
budhisetiawan
Mars Hill, NC Member
Please recheck - CPU SOFT MENU"
That comes up once i put this dang thing together...
Those of you who dont know i have had to revert to an old board because my other blew up.....
Anyone know whats going on here...I am guessing its in the bios....but just a guess...y i left it in HW...
Bud
That comes up once i put this dang thing together...
Those of you who dont know i have had to revert to an old board because my other blew up.....
Anyone know whats going on here...I am guessing its in the bios....but just a guess...y i left it in HW...
Bud
0
Comments
When i saved it tried to restart but nothing....black....just a black scree...
I pulled the plug...battery and pin....reset the cmos...
Now i restart and get this: "CMOS checksum erro - Defaults loaded"
NOW WHAT?
Bud
then started digging...
In the bios i can set it to >1300 so i tried that and saved...
wala it restarted and boot almost....got to where it shows all the irds and stuff but hung w/
"NTLDR is missing"
"Press ctl alt del"
Gonna do a search...but if you know how bout a word...
Thx
Will stick my XP in but first have to hook up drives...was trying to do a piece by piece setup to narrow other problmes....oh well
Here goes
Isnt there a code i have to put in to start the repair?....
Boot from XP CD, like you want to install. NOT REPAIR CONSOLE. Maybe that can fix it - but I don't know how.
Tell it to install - it will detect installation - give you option to do repair install.
Somesuch sequence like that.
I hit repair and then it jumped to a dos screen where it aske me which system...
when i punched in 1 it braught me to a command prompt of D\Windows...
SO now what...lol
ANYONE?
there is no master and slave on the settings...it is H0 H1 and so forth...thing is neither drive has jumpers in them which tells me that default is slave on one and master on the other....but i thought i knew which was which but thinking not now...
I did find an article that told me how to copy the files from the XPCD to the drive and did that and still same thing...so not sure what will happen now...
Going to do the drives one by one and see if that works...
Wont be till tommarrow though cuz working till 0200 and not gonna work on it at 2 in the morn...lol
Post back tommarrow...thx for the input Zun
Bud
I did find an a
Going to try other drive and if that dont work go back to BSOD HD and pull a stick out and see if bad stick in process of Fried MB...
Let you know
NTLDR on other drive.....pulled sticks and swapped still BSOD...
Any Suggestions...
Just buy another BB
Rebuild piece by piece....anybody?
what if i put the Abit back in...
When i get xp to come up i have it do a reinstall....I am guessing my BSOD is from different MB and XP freakin out....
What do you think...
Man i wish i had yah on IM....lol...i amso freakkin impatieant...
Let me know what you think bout reinstall XP ...basically overlapping...
Bud
booted on my k7 that way too...
Think im just going to break down and buy a new MB/PCU/MEM combo....
I got 200....
MemTest-86 v3.2
What about the reinstall of xp?
I downloaded the mem program and put on a floppy...put it in the drive and get a message of "disk boot failure, press....."
now what...
Do u have IM?
Bud
And yes, You can IM me, just click on my name--Hawk-- and in the dropdown menu click --View Public profile-- then in there you can click on whichever IM program you want to add me too on your system. Then, I will get a message saying you have added me to your IM, and I'll add you to mine. Done, Then you can get me on IM.
lol
Any other thought?
I was going to suggest next you try the diagnostics programs from each of the HD manufacturers. But if you can't even boot to the floppy, you can't do that.
I've got my Trillian on now, so if you want to IM. It might be faster.
AIM, MSN, or Yahoo.
but i am an idiot..lol...didnt burn to floppy...lol
trying to IM u
w/ MSN
still nothing