ATX V2.2 V2.0?
What is the difference between the ATX v2.2 and v2.0?
Basically, I am building a new pc:
AMD X2 6000+
Asus M2N-E (Non-SLI)
Two WD 250gb SATA 3.0gb/s(Raid 0)
2gb Crucial Ballistix DDR2-800(2 pieces)
Asus 8800GTS 500mhz
I ordered a 535W PSU, the Enermax EG565P.
This PSU is only v2.0, and not v2.2.
Am I going to encounter any problems when assembling this system? Am I missing out on anything by not getting the v2.2?
Thanks
Basically, I am building a new pc:
AMD X2 6000+
Asus M2N-E (Non-SLI)
Two WD 250gb SATA 3.0gb/s(Raid 0)
2gb Crucial Ballistix DDR2-800(2 pieces)
Asus 8800GTS 500mhz
I ordered a 535W PSU, the Enermax EG565P.
This PSU is only v2.0, and not v2.2.
Am I going to encounter any problems when assembling this system? Am I missing out on anything by not getting the v2.2?
Thanks
0
Comments
Scroll down to the "Revision History."
Now I am running this Enermax EG 565P PS in an X2-5600 build: http://www.directron.com/eg565pvefma22.html in an Asus M2N-SLI Dlx, Seagate 320MB SATA HD and EVGA 8800 GTS with no problems.
You may have even bought the same PS, but I cannot tell from the info you have given. Anyway, no, you should have no limitations by not getting the 2.2 version.
BTW, just a heads-up. In case you haven't run across it, there have been some problem reports with 2x1 gig DDR2-800 RAM modules: specifically Corsair XMS PC2-6400 and Crucial Ballistix PC2-6400 in terms of premature failures, some at the 1 month mark and others toward 6 mos. to a year. Not to suffer from brand-itis, but I have almost always used Corsair XMS. Not this time, however, I went with this because of these issues and have no regrets: http://www.directron.com/mushkin996527.html
By all means, buy what pleases you, but I thought it might be helpful to give you a heads-up on some of the PC2-6400 RAM problems as reported by some users. Best of luck to you whatever way you go!!!