LAN set up... how simple?

revorocksrevorocks England, East Sussex, Hove Member
edited May 2008 in Gaming
Hi,

I was looking to set up a LAN with my friend on sunday at his house.

how simple is it? I use hamachi alot for games of cnc3 with him but it can be laggy.

Im going round his house so i thought ide take my pc with me for a bit of lag free gaming.

Is it just simple as connecting the 2 computers together with a ethernet cable and then going into network and it will work?
Or is there lots of settings etc that i need to configure?:confused:

Thanks.:)

Comments

  • JokkeJokke Bergen, Norway Icrontian
    edited May 2008
    You could do network cable and a hub, or you could just use a crossover cable. Me and a buddy used to do this a while back. I don't really remember the settings part, but it was real simple.
  • FelixDeSouzeFelixDeSouze UK New
    edited May 2008
    Jokke wrote:
    You could do network cable and a hub, or you could just use a crossover cable. Me and a buddy used to do this a while back. I don't really remember the settings part, but it was real simple.

    With the network cable and hub depending on your setup (or his).. If he has a modem (ethernet not USB) he can plug the cable (straight cable) into the hub and then plug 2 more cables into his and your PC and it should connect pretty much straight away.

    Crossover can be connected directly (as you probably know) and as far as I can think all you need to do is ensure your IP addresses don't conflct and MAYBE ensure you are both on the same workgroup (Default is WORKGROUP). -- Crossover cables over in UK are about £5 so maybe $10 over there? no doubt can get them from any electrical store (MAPLIN is one over here, not sure if you have them)
  • revorocksrevorocks England, East Sussex, Hove Member
    edited May 2008
    Yep, im in the uk so i do have maplins just down the road.

    So basically i just plug his pc into the modem and my pc into the modem and it will work?
  • revorocksrevorocks England, East Sussex, Hove Member
    edited May 2008
    Ohh, ive just been on the maplins website and found this. cheap enough an looks like the right thing

    http://www.maplin.co.uk/Module.aspx?ModuleNo=47616&&source=14&doy=search

    so i just plug one end in my pc and the other in his?
  • FelixDeSouzeFelixDeSouze UK New
    edited May 2008
    Yeah that should basically do it.. I've done it with a crossover cable with a friend when we were using 2 PC's on 56k!!!!!

    You may have to set static IP's mind but it aint hard to do :)
  • revorocksrevorocks England, East Sussex, Hove Member
    edited May 2008
    Ok, thanks for that info,

    hope i dont have to set up a static, takes me ages and never seems to work(well has worked once).

    Thanks
Sign In or Register to comment.