Straight_ManGeeky, in my own wayNaples, FLIcrontian
edited January 2004
Well, COG GENERATORS, yes.... The work boxes, nothing personal about it....
10.285 K now, actually....
Something scary....
Reboot Linux, thusly clearing RAM that KDE kept open for things that are long since not active, get this....
[16:32:24] Project: 548 (Run 272, Clone 8, Gen 23)
[16:32:24]
... (cut out usual junk that paints in console when starting client)
[16:32:49] (Starting from checkpoint)
[16:32:49] Protein: p548_BBA5_ext
[16:32:49]
[16:32:49] Writing local files
[16:32:49] Completed 102500 out of 250000 steps (41%)
[16:32:49] Extra SSE boost OK.
[16:36:18] Writing local files
[16:36:20] Completed 105000 out of 250000 steps (42%)
[16:39:50] Writing local files
[16:39:52] Completed 107500 out of 250000 steps (43%)
[16:43:22] Writing local files
[16:43:24] Completed 110000 out of 250000 steps (44%)
[16:46:56] Writing local files
[16:46:58] Completed 112500 out of 250000 steps (45%)
[16:50:28] Writing local files
[16:50:30] Completed 115000 out of 250000 steps (46%)
[16:54:02] Writing local files
[16:54:04] Completed 117500 out of 250000 steps (47%)
[16:57:34] Writing local files
[16:57:36] Completed 120000 out of 250000 steps (48%)
[17:01:07] Writing local files
[17:01:09] Completed 122500 out of 250000 steps (49%)
[17:04:46] Writing local files
[17:04:48] Completed 125000 out of 250000 steps (50%)
[17:08:38] Writing local files
[17:08:40] Completed 127500 out of 250000 steps (51%)
Lessee, an 18 pointer in, um, 5.95 hours plus less than 30 sec download and upload subtotal time, about 6 hours???? !!!!! (for a 5 day deadline WU)
Client: Version 4, Linux.
Core: Core_78, release 1.55
Linux: SuSE 9.0, updated.
Processor, P4 Northwood at 2.4 GHz
RAM, DDR333 NON DUAL.
Run as user in console session outside KDE, vty2, while KDE is surfing adn picking up email in KDE\X\vty7 as same user.
Straight_ManGeeky, in my own wayNaples, FLIcrontian
edited January 2004
Thanks. Right now stats servers are saying 26K by April 10-12 from my ID, still two boxes. I want that figure by last week in March.... And think I can realisticly do thatmuch by that time at the latest, we will see.
Both boxes, by late in Feb, will have motherboard upgrades. With the P4 box adn a Linux client I do not need the forceasm switch, it does not matter. But, forcesse pumps output to 1.15 times the WU output without it.
The Barton box (XP Pro SP1a plus part of the networking for SP2 with part switched OFF by services to eliminate NETBios probe replies, and only switched on from time to time when need to transfer data using switch part of router) likes ALL switches used for best results, it wants the forceasm switch, and the Barton emulates SSE2 just fine.
Client 4.01 used on both, with Core_78 release 1.55. P4\Linux runs console, I am using the graphical client (on P4 box, Barton 2500+) with graphical display minimized to get minimum overhead from display refreshing out of client and thus deloading it-- doing just that pumped output by 3-4 percent.
WuGgaRoO
Not in the shower Icrontian
Comments
10.285 K now, actually....
Something scary....
Reboot Linux, thusly clearing RAM that KDE kept open for things that are long since not active, get this....
[16:32:24] Project: 548 (Run 272, Clone 8, Gen 23)
[16:32:24]
... (cut out usual junk that paints in console when starting client)
[16:32:49] (Starting from checkpoint)
[16:32:49] Protein: p548_BBA5_ext
[16:32:49]
[16:32:49] Writing local files
[16:32:49] Completed 102500 out of 250000 steps (41%)
[16:32:49] Extra SSE boost OK.
[16:36:18] Writing local files
[16:36:20] Completed 105000 out of 250000 steps (42%)
[16:39:50] Writing local files
[16:39:52] Completed 107500 out of 250000 steps (43%)
[16:43:22] Writing local files
[16:43:24] Completed 110000 out of 250000 steps (44%)
[16:46:56] Writing local files
[16:46:58] Completed 112500 out of 250000 steps (45%)
[16:50:28] Writing local files
[16:50:30] Completed 115000 out of 250000 steps (46%)
[16:54:02] Writing local files
[16:54:04] Completed 117500 out of 250000 steps (47%)
[16:57:34] Writing local files
[16:57:36] Completed 120000 out of 250000 steps (48%)
[17:01:07] Writing local files
[17:01:09] Completed 122500 out of 250000 steps (49%)
[17:04:46] Writing local files
[17:04:48] Completed 125000 out of 250000 steps (50%)
[17:08:38] Writing local files
[17:08:40] Completed 127500 out of 250000 steps (51%)
Lessee, an 18 pointer in, um, 5.95 hours plus less than 30 sec download and upload subtotal time, about 6 hours???? !!!!! (for a 5 day deadline WU)
Client: Version 4, Linux.
Core: Core_78, release 1.55
Linux: SuSE 9.0, updated.
Processor, P4 Northwood at 2.4 GHz
RAM, DDR333 NON DUAL.
Run as user in console session outside KDE, vty2, while KDE is surfing adn picking up email in KDE\X\vty7 as same user.
John.
Great job!!!
Tnkx....
John.
Both boxes, by late in Feb, will have motherboard upgrades. With the P4 box adn a Linux client I do not need the forceasm switch, it does not matter. But, forcesse pumps output to 1.15 times the WU output without it.
The Barton box (XP Pro SP1a plus part of the networking for SP2 with part switched OFF by services to eliminate NETBios probe replies, and only switched on from time to time when need to transfer data using switch part of router) likes ALL switches used for best results, it wants the forceasm switch, and the Barton emulates SSE2 just fine.
Client 4.01 used on both, with Core_78 release 1.55. P4\Linux runs console, I am using the graphical client (on P4 box, Barton 2500+) with graphical display minimized to get minimum overhead from display refreshing out of client and thus deloading it-- doing just that pumped output by 3-4 percent.
John.