My new 2600+ arrived.

GHoosdumGHoosdum Icrontian
edited January 2004 in Hardware
I've got my new 2600+ in today. After running it stock for a little while, I set it to 2.3GHz (11.5x200 - it IS locked) and I had to run it up to 1.95 VCore (in BIOS - it really ends up being between 1.90 and 1.92 when I look in Hardware Doctor) to get it to run stable at 2.3...

It's running at 49C full load, at its hottest. I've got an SLK-900A with a 64CFM Enermax 92MM fan on it.

Is this OK, or should I clock down, or heaven forbid even put a vacuum cleaner fan on the HS?

Comments

  • madmatmadmat
    edited January 2004
    As long as it's not running 50c or above I wouldn't worry about it too much myself.
    That's a pretty decent temp for that much Vcore.
  • GnomeWizarddGnomeWizardd Member 4 Life Akron, PA Icrontian
    edited January 2004
    naa u should be ok
  • GHoosdumGHoosdum Icrontian
    edited January 2004
    It ran fine at 1.92, but gromacs were terminating early. It's folding stable at this VCore/Temp, so I guess you guys are right and I'll stick with the 2.3 GHz. :fold:

    Thanks!
  • ClutchClutch North Carolina New
    edited January 2004
    Those temps should be fine. As long as it doesn't go above 50 or so then leave it like it is.
  • GHoosdumGHoosdum Icrontian
    edited January 2004
    Looks like it was choking on WU's all day long while I was at work. This one's not a very good OC'er - I'm going to put it in my girlfriend's rig and get me a 2400+ XP-M Barton to test out in the Primary. I'm going to put that nice XP2100+ that did 2.3 GHz into my Secondary...
Sign In or Register to comment.