Donut's "YARD SALE"

DonutDonut Maine New
edited February 2010 in Trading Post
These are some items I've got just gathering dust, I can't bear to just chuck them, so here they are. Some of this stuff dates back to when I had a small farm for T93.

Paypal is preferred, I will take a USPS MO., prices are shipped in the US.
(More than one item will be less, because shipping will be less. PM me and we'll see what works out.)

Video cards:

2-TNT 2's (pci) 10.00 ea
Oldies but goodies. Basic video out, great for troubleshooting.

Heatsinks/cooling:

--Scythe Ninja (no fan) 17.00
 I ran this on a few sockets. http://www.scythe-usa.com/product/cpu/006/scnj1000p.html I had a pair, but over the years, I lost or re-purposed some of the mounting hardware, so I combined the 2 and made 1.

--HDT Cooler, 17.00 (? brand, Xigmatek or similar) No 120mm fan, does have the mounts and a Thermalright bolt-through kit. Looks like this one. http://www.newegg.com/Product/Product.aspx?Item=N82E16835233003&cm_re=xigmatek-_-35-233-003-_-Product.The&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction

2 OEM Intel HSF- 8.00 ea -These were off Q9550's, relatively short, copper slug in the middle.

1 OEM Intel HSF- 8.00 - This was off of a Q6600, taller than the q9550 sinks (x2), copper slug is not solid all the way through.

Swiftech Apogee 23.00 - Looked around one day and realized that I had more waterblocks than rigs to cool. It's the one on the left in the picture.http://www.swiftnets.com/PRODUCTS/apogee.asp it has 2 plastic barbs and 4 springs.

Other:

Sunbeam Rheobus 4 channel 5.25". 14.00 -I bought this used, so some minor scratches, Alum/silver. color. NO Cables. http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=363 This worked until I installed an air cooled video card folding, quiet went out the window :).

2- PCI -NICs- (?Intel) 8.00 ea. Both have a sticker on them "Compaq NC 3121" so I'm thinking they were Compaq spares.

Gigafast 8-port Ethernet switch 13.00 (ez 800-s) It does have 4 brown spots on top of the unit, that line up perfectly with a 5 port switch I'm keeping. http://www.gigafast.com/products/product_detail/EZ800-S.htm

Linksys 5-port ethernet switch 13.00 (ezxs55w) It appears to have a few small paint specs on one corner. http://www.newegg.com/Product/Product.aspx?Item=N82E16833124005&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction This is the switch and power pack ONLY. OEM packaging was tossed years ago

Linksys 5-port Ethernet switch 8.00 Same as above EXCEPT no power pack and the rubber feet on the unit are gone.

I do have misc. cables and other parts, If you need something, LMK and I can stuff it into your box.

These are shipped prices, so don't expect a price drop. Multiple items will be discounted, however single items will not be worth my effort with prices any lower. (have you ever tried to stuff a heatsink into an envelope?:buck:)

tomsell004.jpg
tomsell003.jpg
tomsell0012.jpg
blocks1.jpg

Comments

  • KometeKomete Member
    edited February 2010
    Do you have the mounting hardware for the Scythe Ninja to fit an AM3 socket? Also is it better than the HDT cooler?
  • DonutDonut Maine New
    edited February 2010
    I'm guessing on the mount, but I'd say no. (link has compatible sockets).
    I originally bought the Ninjas for a dual socket 940 rig, then one got moved to a q6600. The HDT did better on the q6600 did, but not by much. Whatever the links show for mounting hardware is what I have.
    The HDT "may" be a Ximatek. I had 3 of these style coolers and side by side, I couldn't tell the difference. (looks or performance).
  • KometeKomete Member
    edited February 2010
    Hrmm... I have a Ximatek unit but I didn't even try to install it. My mounting clamps are a little worn out and was hopeing for a cheap upgrade with the ninja. Ah well...
  • DonutDonut Maine New
    edited February 2010
    The Ninja is starting to show it's age, but it's still a good cooler. IMO, it's primarily designed for quiet operation. (wide fin spacing and a lower rpm fan)I have run both these coolers on a B3 q6600, like I mentioned, the HDT I feel was a little better. The only real noticeable improvement was when I stepped up to the TRUE in a push/pull, then water.
  • jedihobbitjedihobbit Central Virginia, USA New
    edited February 2010
    Okay I may be blind, but didn't see anything concerning the 8800GT in the pic........ :D
  • _k_k P-Town, Texas Icrontian
    edited February 2010
    Does the Ninja have a fan?
  • DonutDonut Maine New
    edited February 2010
    jedihobbit wrote:
    Okay I may be blind, but didn't see anything concerning the 8800GT in the pic........ :D
    Look under "completed trades" the 8800GT was listed for 5 days and no interest. If your interested now PM me. I do still have it and might be convinced into giving it up.;)

    _k_- I do have the fan that was on the Ninja, in fact I'm using it for a case fan now. The fans are getting a little age on them, that's why they aren't listed with them. If you want the old fan, I could throw it in.
  • jedihobbitjedihobbit Central Virginia, USA New
    edited February 2010
    YGPM
  • DonutDonut Maine New
    edited February 2010
    PM's replied.
    In case it wasn't noticed yet. In the pics, the 8800gt is gone and so is the Apogee GTX waterblock. I never took a pic of the Rheobus, so shoot me!:p
  • _k_k P-Town, Texas Icrontian
    edited February 2010
    ygpm
  • DonutDonut Maine New
    edited February 2010
    replied.

    HDT sold to _k_
  • DonutDonut Maine New
    edited February 2010
    Sale closed
This discussion has been closed.