Lancool Project: "Unreal Tournament III" Tribute
Hi everybody! I see some familiar faces
I was referred to Icrontic by my friend, custompcmax!
This is project for my friend, who loves playing "Unreal Tournament III"
Lancool PC-K62R1 on Newegg, http://www.newegg.com/Product/Product.aspx?Item=N82E16811112268
Let's take tour of this chassis before it gets modified!
2x 140mm exhaust fans (specs?)
140mm intake fan (Red LED)
Red Anodized Aluminum PCI card holders.... The Best design on the market, period.
Filtered Power supply location, rubber dampening... A bracket is included to hold the PSU firmly in place.
You can rotate the HD cages to front/rear configuration by removing 4 screws.
One of the best looking and constructed HD cages I've seen to date... Nice and Rugged!
I etched the Unreal logo into the side panel window with my Dremel and these Engraver Attachments
Here are some of the products from Mnpctech I'm using for this build project. Most Computer Chassis will accept 1/8†diameter Pop rivets, Gripe range .092" - .125" for Computers.
http://www.mnpctech.com/Pop_rivets_for_computer_case.html
120mm Black Honeycomb Grills, http://www.mnpctech.com/120mm_Custom_FanGrill.html
Socket head stainless steel screws used for the fan grills.
http://www.mnpctech.com/M4_radiator_grill_screws.html
The top 2x 140mm exhaust grill. The vents in the top cover will be removed.
This is the Unreal faceplate for the front bezel, made from 1/8" thick acrylic, with 140mm grill.
1x DVD drive will be used... Reaper silhouette will clear drive drawer, eject...
Next step is mounting holes, prepped and painted Matte Black base coat before Airbrushed art work
Acrylic Scuffed
Primer Basecoat
Using 2000 Volkswagen Tornado Red, factory paint code G2, LY3D, on top 280 fan grill inserts
I was referred to Icrontic by my friend, custompcmax!
This is project for my friend, who loves playing "Unreal Tournament III"
Lancool PC-K62R1 on Newegg, http://www.newegg.com/Product/Product.aspx?Item=N82E16811112268
Let's take tour of this chassis before it gets modified!
2x 140mm exhaust fans (specs?)
140mm intake fan (Red LED)
Red Anodized Aluminum PCI card holders.... The Best design on the market, period.
Filtered Power supply location, rubber dampening... A bracket is included to hold the PSU firmly in place.
You can rotate the HD cages to front/rear configuration by removing 4 screws.
One of the best looking and constructed HD cages I've seen to date... Nice and Rugged!
I etched the Unreal logo into the side panel window with my Dremel and these Engraver Attachments
Here are some of the products from Mnpctech I'm using for this build project. Most Computer Chassis will accept 1/8†diameter Pop rivets, Gripe range .092" - .125" for Computers.
http://www.mnpctech.com/Pop_rivets_for_computer_case.html
120mm Black Honeycomb Grills, http://www.mnpctech.com/120mm_Custom_FanGrill.html
Socket head stainless steel screws used for the fan grills.
http://www.mnpctech.com/M4_radiator_grill_screws.html
The top 2x 140mm exhaust grill. The vents in the top cover will be removed.
This is the Unreal faceplate for the front bezel, made from 1/8" thick acrylic, with 140mm grill.
1x DVD drive will be used... Reaper silhouette will clear drive drawer, eject...
Next step is mounting holes, prepped and painted Matte Black base coat before Airbrushed art work
Acrylic Scuffed
Primer Basecoat
Using 2000 Volkswagen Tornado Red, factory paint code G2, LY3D, on top 280 fan grill inserts
0
Comments
Yes, it's aluminum Buddy.
<cite class="ic-username"></cite>
While working on this, I had the opportunity to get a product sample from NZXT to install, their new sleeved LED kit.
I was pleasantly surprised at the $9.99 retail price. ($14.99 for 2 meter long version) The ability to hide the LEDs out of sight was also alluring. The kits are sold in two length variations, 1 meter (39") for MATX and Mid Tower or 2 meter (78") for Full Tower cases. The LED bulbs are 3mm diameter. The brightness specification isn't available.
Pictured here is the 2 meter version with Orange LEDs. I'll be installing the 1 meter version with Red LEDs. The kits are offered in 5 colors, Red, Green, White, Blue, or Orange.
The kit includes Molex connector, ten Black adhesive backed mounting clips and one screw for mounting the circuit board in PCI slot.
The sleeving is offered only in Black for all the kits. It's very good quality material similar to Techflex.
The NZXT Sleeved LED Kit is paired with a three step light sensitivity and on/off light function that mounts in a PCI slot. You can switch the brightness between high, medium, and low settings or off.
Ten Black plastic mounting clips.
The clips are adhesive backed for tucking the LED cable into small crevices.
The brightness specification isn't available anywhere. This photo shows them at their highest setting, which provides ample lighting. You can always add another kit to meet individual applications. It would be nice if NZXT allowed you to daisy chain additional LED cable onto one kit. The end is a closed connection. Opportunity for mod? Hopefully we will see this change made to future version of the kit.
The 1 meter (39") length had 12" of additional cable left after mounting it around the access side perimeter of the K62R chassis. I used some PC Cable and Zip Ties Computer, Black cable ties to bind the cable together.
The cable lead from the circuit board. I would like to see the cable connection on the circuit board located near the PCI slot instead, to avoid this loop. I'm going to use a cable tie base to tack the cable to PCI slot.
It only took a few minutes to install the kit. fyi: Having a Red chassis helps improve the illumination too!
http://www.newegg.com/Special/ShellShocker.aspx?cm_sp=ShellShocker-_-11-112-238-_-12012010
I really appreciate the CNC work on your grills.
@Buddy, they're great product for the price and thanks!
He also wanted me to modify his DVD drive with a window. You’ve seen the Hard drives with windows, but how about a DVD drive? I posted all of the steps involved here, http://www.casemodblog.com/?p=7881
Great to have you here bro!!:cheers2:
Thank you for the welcome and the Cold One! :thumbup
will be released sometime in January on my YT Channel
@Tushon, I cant wait until he gets it
@Cliff, me too!
I've re-installed the top 280mm fan grill.. It looks sweet!
http://www.mnpctech.com/ITX_MATX_Computer_Case_Feet.html
These will help intake ventilation for PSU's cooling fan