OCZ memory problem
i5-750
GA-p55a-ud4p
OCZ 2x2gb DDR3-133
samsung 1tb
powercolor hd 5770 pcs+
antec 650w
lg dvd writer
window 7 64bit
I had problem new homebult computer freeze with one color screen(all red, or all grey)
So I tested prime95 and memtest86+ v4.0...
With several test done...some result were passed and some were failed
I tried using timings of 9-9-9-20(CAS, tRCD, tRP, tRAS), command rate of 2t, and 1.65 volts (except my mobo p55a-ud4p can select 1.64 (1.648 reading) or 1.66). Still passed and failed some.
As I was testing I notice memory SPD information
-slot0: 2048MB PC3-8500
-slot1: 2048MB PC3-8500
Isnt it my memory should be reading as PC3-10666?
I already got memory exchanged and same problem exist.
any suggestion would be very helpful ...thank you in advance.
GA-p55a-ud4p
OCZ 2x2gb DDR3-133
samsung 1tb
powercolor hd 5770 pcs+
antec 650w
lg dvd writer
window 7 64bit
I had problem new homebult computer freeze with one color screen(all red, or all grey)
So I tested prime95 and memtest86+ v4.0...
With several test done...some result were passed and some were failed
I tried using timings of 9-9-9-20(CAS, tRCD, tRP, tRAS), command rate of 2t, and 1.65 volts (except my mobo p55a-ud4p can select 1.64 (1.648 reading) or 1.66). Still passed and failed some.
As I was testing I notice memory SPD information
-slot0: 2048MB PC3-8500
-slot1: 2048MB PC3-8500
Isnt it my memory should be reading as PC3-10666?
I already got memory exchanged and same problem exist.
any suggestion would be very helpful ...thank you in advance.
0
Comments
Could you give the exact model number of the RAM as it appears on the sticker? Also, when you were doing your memory testing were you testing one stick at a time and trying to run them in the first slot?
2x2GB DDR3-1333
PC3-10666 CL
9-9-9-20 dual channel
I did test the memory one stick at a time...both failed
I will try to update my bios since there are newer version available.
still failed the test. I dont know what else to fix the problem...
1066 is more stable but still fails some tests.
In your case a few top notch guys from OCZ are members here at icrontic & I am sure they will help you out with your issues.
still failed test of prime95....although I dont seem to get the fail test on memtest86+ as before.
someone suggested that it maybe memory controller or incompatibility with ram and mobo. for i5 750... memory controller is intergrated into chip.
is there cpu testing program??? only thing I tested is cpu temp which is lower than 60 on load.