Post your current temps

tycho

49C full load

axp 2500+ @2.1 GHz using the stock heatsink

i got ya armegeddon, ill keep it going ;-)

danball1976

Here's mine. CE has gone and turned the AC off in the dorms

TBonZ

xp@1680


xp@1682


xp@1727


xp@1737

Sputnik

Barton 2500+ @ 2126 (12x176)
System 23*
Core 36*
SLK-800a topped by a thermaltake Smartfan 2 @ near full speed (4500 RPM)


system not completeley stable at any higher i'm thinking memory isn't stable enough.... gonna get a little help with a stable higher overclock

RWB

Pentium 4 2.4B @ 2.9GHz(161*18) 1.65v / Swiftech MCX4000-B w/ Y S Tech TMD Magnetic Drive Fan @ 10K RPM's / ABIT IS7 Motherboard / x2 Kingston HyperX 2/5/2/2 / x1 Maxtor 40GB Liquid Bearing ATA133 8ms HDD's / Abit Siluro Ti4600 @ 320/700 / TTGI 520W PSU Model TT-520SS Triple Smart Fans / Lite-On DVD 16x48 & Lite-On CDRW 40x12x48 / TEAC FDD / Windows 2000 Pro SP4

This is not very good temps, thing is, I have no idea how it is so hot with my HSF that I have and Arctic Silver Ceramique.

BTW that AS Cermamque is dangerous with P4's the CPU CLINGS to the HS as if it were glued, I wound up ripping my CPU out of the ZIF Slocket when I tried removing it the other day!!!!!!! Scared the hell out of me, and makes me wander how I am gonna take the HSF off next time without fear of pulling the pins off the CPU.

TheBaron

i've got an IS7 just like you, and i've got temps that are just as bad. if you read the ABIT forums, apparently they do some kind of modification on the read #'s, so they say subtract 10-15 degrees from what you see. now on the other hand, some people dont have crazy #'s like these.

my slk-900 w/ 2.8c, non-OC'd runs at 53.5 load, if that gives you any indication.

also, i've had the same problem with clingy thermal paste, ive ripped the cpu out of the socket 3 times! i'm surprised it still works..

RWB

I do 48C Idle... or at least that is what I am at ATM without F@H running. I am heading to Abit forums now to check out what you speak of Thanks!