What are the upgrade options for an *old* slot 1 motherboard?

SlackerSlacker CA, USA
edited August 2003 in Hardware
Got to upgrade an old slot1 Pentium 3 box (BX chipset I think) for some relatives but I'm not exactly sure what to recommend them. Anyone have any experience with SlotKET's or know where I can get a 800MHz slot1 P3 for about $60 - $80? Thanks.

Comments

  • HackingGuruHackingGuru
    edited August 2003
    The trash can :)
  • StrangerStranger
    edited August 2003
    http://www.starmicro.net/SearchResult.aspx?CategoryID=31&WebID=401f7e86-ca5e-4fca-a095-055b94553c0f

    Or go to pricewatch.com and look at the CPU section (or streetprices.com).
  • SlackerSlacker CA, USA
    edited August 2003
    HackingGuru - Believe me if this were my computer I would. ;)

    Stranger - Thanks for the link.. damn P3s are expensive.. even if they are 3 years old. :(
  • Geeky1Geeky1 University of the Pacific (Stockton, CA, USA)
    edited August 2003
    Powerleap/Upgradeware adapters

    www.strattoncomputer.com
  • TexTex Dallas/Ft. Worth
    edited August 2003
    Go to ebay and search for slocket. These allow socket 370 coppermine celerons to run in a slot one MB. remember the MB must support the multiplier for the cpu. The coppermine celerons are much faster then the p3 slot1's but... Frys has ECS k7s5a pros' in a combo with 2000 XP's for 69 bucks with sound and lan built in. takes ddr or pc133 sdram. Throw in a HSF and video and your rocking. I just sent one of those and a 2400 xp+ in the same combo ($89) to Omega65 in Philly as he has no frys near him.

    Tex
  • Geeky1Geeky1 University of the Pacific (Stockton, CA, USA)
    edited August 2003
    Fry's here in CA has a 1800/K7S5A Pro for $60... I've bought 4 of them now (1 for me, 3 for friends) and ALL 4 CHIPS have been JIUHB DLT3C 1800+es.... haven't had a chance to test them yet tho...
  • Omega65Omega65 Philadelphia, Pa
    edited August 2003
    Originally posted by HackingGuru
    The trash can :)

    BWAHAHAHA Thats was my First thought Also! :D
    Originally posted by Tex
    Go to ebay and search for slocket. These allow socket 370 coppermine celerons to run in a slot one MB. remember the MB must support the multiplier for the cpu. The coppermine celerons are much faster then the p3 slot1's but... Frys has ECS k7s5a pros' in a combo with 2000 XP's for 69 bucks with sound and lan built in. takes ddr or pc133 sdram. Throw in a HSF and video and your rocking. I just sent one of those and a 2400 xp+ in the same combo ($89) to Omega65 in Philly as he has no frys near him.

    Tex

    Just got them too! Thanks Tex!

    I second Tex's suggestion. The ECS Athlon combo ($50 - $89 1700+ - 2400+) performs better and is cheaper than any P3 setup you can create.
Sign In or Register to comment.