Wow! 2.5GHz 2500!

Geeky1Geeky1 University of the Pacific (Stockton, CA, USA)
edited June 2003 in Hardware
One of my 2500s just POSTed @ 2500MHz (12.5x 200) in an Abit KX7 :wow: :wow: :wow:

It crashed while detecting the IDE drives, but I'm almost positive that's due to the high PCI/AGP clocks (40/80MHz). I can't wait to get the A7N8X back and see what this thing can really do. If I can get them both running stably @ 2.5GHz, I should be able to get a 5GHz AMD MP system when I throw 'em in there :wow:

I dunno what kind of OCs people are getting on the 2500s, but 2.5GHz on air cooling is insane!

Comments

  • Omega65Omega65 Philadelphia, Pa
    edited June 2003
    :celebrate:

    Lucky bastard! :)
  • Geeky1Geeky1 University of the Pacific (Stockton, CA, USA)
    edited June 2003
    :D

    I also picked up 4 of those 160 gig maxtors to put into 2 320 gig raid 0 arrays... I MAY pick up 2 gigs of PC2700 for it too, but I'm not sure about that yet...
  • danball1976danball1976 Wichita Falls, TX
    edited June 2003
    I'm not that brave to go that high on the FSB
  • leishi85leishi85 Grand Rapids, MI Icrontian
    edited June 2003
    no worries, danball, i had my old trusty kx7 running 205fsb without any mod what so ever, it was such a great, i had to sell it to get me a 8rda+ a while back
    and congrats to geeky for the OC, my 1700+ is also running at the same speed, i had it at 200x12.5 but i went for the 205x12 instead, hopefully you will get the same OC with your other chip, to runn in duall with a healthy 5 gig RAW amd power.
  • seversphereseversphere
    edited June 2003
    danball1976 said
    I'm not that brave to go that high on the FSB

    you running 11.5 X 195 or 12.5 X 180






    Geeky1: so you can run 12.5 X 195~197 no problems?
  • Geeky1Geeky1 University of the Pacific (Stockton, CA, USA)
    edited June 2003
    @ 195, yes. @ 197, I dun know- I haven't tried it @ 197... I still can't figure out why it's letting me change the mutli on a "locked" chip (or is the 2500 unlocked too?) I
  • danball1976danball1976 Wichita Falls, TX
    edited June 2003
    seversphere said
    danball1976 said
    I'm not that brave to go that high on the FSB

    you running 11.5 X 195 or 12.5 X 180

    Geeky1: so you can run 12.5 X 195~197 no problems?

    No, I'm running at 13.5x166 (from 12.5x166). My KD7-RAID allows me to change the multipliers on my CPU
  • csimoncsimon Acadiana Icrontian
    edited June 2003
    geeky is the 2500 an xp or mp?
  • seversphereseversphere
    edited June 2003
    2500 is unlocked - Tbreds and newer are unlocked

    DB1976: try 12.5X180 then 11.5X195 - no problem with pc3200 ram and KD7 series of boards will safely do upto 195 with no worry of losing data or problems. Just raise your ddr voltage.
  • danball1976danball1976 Wichita Falls, TX
    edited June 2003
    I know, but then there's the issue of heat.

    How hot can it go before I'm living dangerously?
  • CycloniteCyclonite Tampa, Florida Icrontian
    edited June 2003
    Stay below 60C... Just keep an eye on it and step it up slowly.
  • danball1976danball1976 Wichita Falls, TX
    edited June 2003
    Yeah, I guess I should install MBM when and if I do that.
  • seversphereseversphere
    edited June 2003
    look do it this way - drop your multiplier to 10 and leave your vcore and vdimm alone. Raise your fsb to 180 and try benchmarks or prime95 for a few minutes. Then work your way up to 195. If you are unstable (freeze/crash) then raise your vdimm. You should not need more than 2.85 vdimm - no heat issues for the ram. So if you make it to 195 then you'll be running 1950mhz and now raise your multi to 10.5 then 11 then 11.5 testing at each step for a few minutes.
  • danball1976danball1976 Wichita Falls, TX
    edited June 2003
    I guess I'll have to work at that later.
  • Geeky1Geeky1 University of the Pacific (Stockton, CA, USA)
    edited June 2003
    csimon; that 2500 is an XP, but don't tell my K7D Master-L that, because it's getting both of 'em (I've got 2 identical stepping retail 2500s) after they're modded to MPs and set to run @ 15 or 16x multis...
  • LawnMMLawnMM Colorado
    edited June 2003
    danball1976 said
    I'm not that brave to go that high on the FSB

    So you keep telling us.
  • ClutchClutch North Carolina New
    edited June 2003
    2 320 gig raid 0 arrays holy smokes, what are you going to be using this computer for? a file server I hope. That's a lot of space my friend, use it wisely, lol
  • Geeky1Geeky1 University of the Pacific (Stockton, CA, USA)
    edited June 2003
    Clutch, it's not about the size, it's about the speeeeeed... it's just going to be my desktop- games, word processing, etc. but the drives were hella cheap- $173 in store w/tax for 3, $153 w/tax fo the other, minus 4 $70 rebates, minus 3 Maxtor (Promise) ATA-133 cards, which I think I'll get $20 for apiece, so that's another $60 off, so the total is $332 for the drives themselves... not bad for 640 gigs...

    As for using it wisely... I'm thinking I'll volunteer to approve pix for the babe thread :D
  • FormFactorFormFactor At the core of forgotten
    edited June 2003
    Yes thats a nice OC.


    It will be interesting to see how far you can push dat b*tch!
  • ShortyShorty Manchester, UK Icrontian
    edited June 2003
    :wow2: Nice O/C

    :celebrate

    Soon as my SLK 900 arrives...
  • DoM-aLDoM-aL Indiana
    edited June 2003
    Speaking of which... how loud are the slk 7's, slk 800's, and slk 900s?
  • ShortyShorty Manchester, UK Icrontian
    edited June 2003
    As loud as the fan you put on them :)

    They are only heatsinks, you provide the fan of your choice.
  • DoM-aLDoM-aL Indiana
    edited June 2003
    bleh i'm a fool.
Sign In or Register to comment.