no video from gforce 9600GT

CBCB Ƹ̵̡Ӝ̵̨̄ƷDer Millionendorf- Icrontian
edited November 2008 in Hardware
System:

MoBo: DFI Infinity NFS70-M2/G
Video: Palit GForce 9600GT 1GB Sonic
RAM: 2x Firestix DDR2 1GB

The system seems to be booting (I can hear it accessing the drives, and all the fans on all the parts are spinning), but nothing is being output. The monitor doesn't even react to the system being switched on.

I've tried every possible configuration of RAM sticks, PCIe slots, and DVI out ports. The monitor is known to be working.

Suggestions?

Comments

  • ThraxThrax 🐌 Austin, TX Icrontian
    edited November 2008
    What happens if you put a different video card in it?
  • LeonardoLeonardo Wake up and smell the glaciers Eagle River, Alaska Icrontian
    edited November 2008
    If not already performed:
    - turn off power
    - unplug system from the wall
    - remove the video card
    - reseat the card
    - try to boot

    If no go: repeat the procedure but reset the BIOS before attempting to boot.
  • CBCB Ƹ̵̡Ӝ̵̨̄Ʒ Der Millionendorf- Icrontian
    edited November 2008
    Thrax wrote:
    What happens if you put a different video card in it?

    Unfortunately, this is the only PCIe video card I have access to, and the board has no AGP slots.
    Leonardo wrote:
    If not already performed:
    - turn off power
    - unplug system from the wall
    - remove the video card
    - reseat the card
    - try to boot

    If no go: repeat the procedure but reset the BIOS before attempting to boot.

    I have already moved the video card back and forth between the two PCIe slots several times, but I hadn't actually tried resetting he BIOS yet.

    Still nothing, however.
  • CBCB Ƹ̵̡Ӝ̵̨̄Ʒ Der Millionendorf- Icrontian
    edited November 2008
    It's working now... Apparently everything just needed to be unplugged and plugged back in one more time. :P
Sign In or Register to comment.