How many units?

chipatkinsonchipatkinson San Antonio Texas
edited July 2004 in Folding@Home
Hello all!

How many units do I need to process before I show up as team member on the tracking sites? I visited a few of them but couldnt find my name associated with team 93. According to the FAHlog.txt file, I've completed four units. Just a curious question from a newbie :-)
«1

Comments

  • muddocktormuddocktor
    edited July 2004
    Chip, you should be showing up if you've finished 4 wu's now. What username did you choose to use and which client are you using, the graphical or the console version?

    I just looked for usernames starting with chip but don't see your forum name listed anywhere's at Stanford. :confused:
  • KwitkoKwitko Sheriff of Banning (Retired) By the thing near the stuff Icrontian
    edited July 2004
    You have to complete a work unit and send it back to Stanford. About 3 hours after that your name should show up in the stats. Give it a day just to be sure.

    Did you complete 4 units or 4% of the full WU?
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    Dont know...here is what the log says:

    + Results successfully sent
    [12:46:56] Thank you for your contribution to Folding@home.
    [12:46:56] + Number of Units Completed: 3

    [12:47:00] - Preparing to get new work unit...
    [12:47:00] + Attempting to get work packet
    [12:47:00] - Connecting to assignment server
    [12:47:00] - Successful: assigned to (171.64.122.123).
    [12:47:00] + News From Folding@Home: Welcome to Folding@Home
    [12:47:00] Loaded queue successfully.
    [12:47:33] + Closed connections
    [12:47:33]
    [12:47:33] + Processing work unit
    [12:47:33] Core required: FahCore_78.exe
    [12:47:33] Core found.
    [12:47:33] Working on Unit 04 [July 13 12:47:33]
    [12:47:33] + Working ...
    [12:47:33]
    [12:47:33] *
    *
    [12:47:33] Folding@home Gromacs Core
    [12:47:33] Version 1.65 (May 6, 2004)
    [12:47:33]
    [12:47:33] Preparing to commence simulation
    [12:47:33] - Looking at optimizations...
    [12:47:33] - Created dyn
    [12:47:33] - Files status OK
  • KwitkoKwitko Sheriff of Banning (Retired) By the thing near the stuff Icrontian
    edited July 2004
    Could you post your MyFolding.html?
  • mmonninmmonnin Centreville, VA
    edited July 2004
    I am guessing for forum name is your FAH username since thats whats what you put in your profile for the pic under your forum name.

    As kwitko said you might have done 4% of the WU.

    Edit: But the log says you have completed 3 WUs.
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    Kwitko wrote:
    Could you post your MyFolding.html?


    That appears to be the problem....here is the MyFolding.html How do I change it from anonymous? I guess when I set up the service, I didn't do it correctly.

    My Folding@home Home

    Your information
    User name: Anonymous
    Team number: 0


    Current/latest unit
    Unit name, download time, progress: unitinfo.txt


    Statistics
    Personal statistics: http://folding.stanford.edu/cgi-bin/userpage?q=Anonymous
    Team statistics: http://folding.stanford.edu/cgi-bin/teampage?q=0


    Project links
    Home page: http://folding.stanford.edu
    Current project descriptions: http://folding.stanford.edu/cgi-bin/allprojects
    Downloads: http://folding.stanford.edu/download.html
  • mmonninmmonnin Centreville, VA
    edited July 2004
    Edit client.cfg. Stop then service first.
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    chip ...stop the client ...make sure it is stopped then get back in touch as soon as it has.
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    Ok, I went through task manager and clicked end process.....hope that is how I was supposed to stop it.
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    Ok chip ...assuming you've successfully terminated the client I'll show you what to do.

    First of all ...post the contents of your client.cfg file ...should look something like this:

    [settings]
    username=csimon
    team=93
    asknet=no
    machineid=1
    local=397

    [http]
    active=no
    host=localhost
    port=8080
    usereg=no

    [clienttype]
    type=1

    [core]
    checkpoint=30
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    chipatkinson wrote:
    Ok, I went through task manager and clicked end process.....hope that is how I was supposed to stop it.
    perfect.
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    I dont think it stopped....when I click end process in task manager...it ends...but then automatically starts again?

    Suggestions?
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    it takes a little while to actually stop ...did you use my method to install or did you use some other method?

    try start>run...>services.msc

    find the folding client there and highlight it and pick stop to the left.
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    Found it and stopped it. Will follow your previous instructions now.
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    client.cfg is posted below.

    [settings]
    username=Anonymous
    team=0
    asknet=no
    machineid=1
    local=3

    [http]
    active=no
    host=localhost
    port=8080
    usereg=no
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    I used the firedemon to do the service.
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    ok here goes ...we'll just reconfigure it.

    open the command prompt and maneuver your way into the Folding folder. I'm not sure where you finally put it so I can't be much help unless you tell me where it is.

    Anyway once you get there (lets use c:\f@h for example) just type fah4console -configonly ...that will bring up the client in configure mode only but won't restart the client when finished.
    Then just go through each prompt and you should be able to configure just like I have mine in my pic.

    Got any questions before you get started?
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    No questions...it is in c:\program files\f@h
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    cool ...well you should be able to open the command prompt while my configuration is in the background to make it easy to follow ...if your resolution is set high enough.

    It might look like this:
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    Ok...typed in and followed prompts to mirror yours....what now?
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    show me your client.cfg file again.
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    here is my client.cfg now

    [settings]
    username=chipatkinson
    team=93
    asknet=no
    machineid=1
    local=3

    [http]
    active=no
    host=localhost
    port=8080
    usereg=no

    [clienttype]
    type=1

    [core]
    priority=0
    cpuusage=100
    disableassembly=no
    checkpoint=30
    ignoredeadlines=no
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    cool ...now restart the client the same way to stopped it and you're good to go!
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    Working now....thanks for your help! Ok...as for the previous work done, is that transfered to my name or chalk it up to experience gathering..lol

    Main thing, is the work was still done, but doesn't look like the team gets credit for the previous work done.

    Thanks for your help!!!!!

    Chip
  • KwitkoKwitko Sheriff of Banning (Retired) By the thing near the stuff Icrontian
    edited July 2004
    You don't get those WUs in your name, but at least you turned in some WUs for the cause in general. When you get your first WU for us, you're gonna be hooked. :)
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    it's ok we all make that mistake initially.
    It goes to anonymous user team 0 ...no biggy it's all for the same cause.
  • chipatkinsonchipatkinson San Antonio Texas
    edited July 2004
    Absolutely right!

    Thanks for helping me configure things correctly!
  • DonutDonut Maine New
    edited July 2004
    :woowoo: back up and folding chipatkinson,

    Caution: folding can be addictive!!

    Great job guys, I've been following the thread but unfortunately couldn't help out. Glad all is working now.
  • LeonardoLeonardo Wake up and smell the glaciers Eagle River, Alaska Icrontian
    edited July 2004
    Chip, the fact that you consulted other Team members so fast after the fact shows that you are loyal and really care about the project. Thank you very much. Actions such as those you just took foster a more positive spirit within Team Short-Media. We are proud to have you as a member.

    Very smooth assistance, CSimon!
  • csimoncsimon Acadiana Icrontian
    edited July 2004
    Leonardo wrote:
    We are proud to have you as a member.
    very proud!
    chip is excellent to work with I must say! :fold:
Sign In or Register to comment.