Epic 2014: Print 3D

RyanFodderRyanFodder Detroit, MI

I would like to offer printing service to those here at EPIC this year!

If you have an STL file ready to go*, I will figure out how to print it for you!

Parts should be less than 8" x 9" x 6" (physical size of my printer). Also a print cannot occur during the TF2 tournament since my laptop will be needed.

Colors available:
ABS orange
ABS Green (fluorescent)
ABS Red
ABS Black
ABS Blue
PLA Blue

Less than 1 hour print free!
$10 small print (1-4 hrs)
$20 per print (4 - 8 hours)
$30 Large print (8+ hours)

*I will not be offering design services during the event. (There just isn't time)

ThraxBobbyDigi
«1

Comments

  • ThraxThrax Professional Shill, Watch Slut, Mumble Hivemind Drone Austin, TX

    Do you have a laser scanner? If so, how long would the scanned object need to remain rigid?

    mertesnRyanFodderCreeperbane2
  • KwitkoKwitko Sheriff of Banning (Retired) By the thing near the stuff

    Dickboats are free, though.

  • RyanFodderRyanFodder Detroit, MI

    Depends on the alcohol content.

    UPSLynxmertesnGargCreeperbane2
  • ThraxThrax Professional Shill, Watch Slut, Mumble Hivemind Drone Austin, TX

    http://www.thingiverse.com/thing:232318/#files

    It should print in < 45 minutes. Will have to see the colors myself before I decide.

  • BobbyDigiBobbyDigi ? R U #Hats ! SoCal

    Are you able to mess with the scale of a thing?

    http://www.thingiverse.com/thing:313883

    I would need the internal diameter to be ~21-22mm

    -Digi

  • CrazyJoeCrazyJoe Winter Springs, FL

    How do I tell what size a thing is? I'd love to get this made, but have no idea how big it is to determine prices.

    http://www.thingiverse.com/thing:251565

  • @CrazyJoe said:
    How do I tell what size a thing is? I'd love to get this made, but have no idea how big it is to determine prices.

    http://www.thingiverse.com/thing:251565

    LOL I can't wait to hear how your trip back through airport security goes with THAT in your bag!

  • RyanFodderRyanFodder Detroit, MI
    edited June 2014

    I can very easily adjust the scale.

    Edit: I don't think the detail on the ring will show up well.

    GnomeQueen
  • RyanFodderRyanFodder Detroit, MI

    @CrazyJoe said:
    How do I tell what size a thing is? I'd love to get this made, but have no idea how big it is to determine prices.

    http://www.thingiverse.com/thing:251565

    Sorry: going with not doing that one because 1) its a gun, and 2) see reason 1.

    midgaCanti
  • RyanFodderRyanFodder Detroit, MI

    @BobbyDigi said:
    Are you able to mess with the scale of a thing?

    http://www.thingiverse.com/thing:313883

    I would need the internal diameter to be ~21-22mm

    -Digi

    If you're interested in getting this later, we might be able to print said ring, laser cut the writing, and cast out of a gold looking epoxy, cast in bronze or maybe gold if you'd like to pay for it.

    It'd be ~ 2 weeks after expo though.

  • AlexDeGruvenAlexDeGruven Wut? Meechigan

    @GHoosdum said:
    LOL I can't wait to hear how your trip back through airport security goes with THAT in your bag!

    Can't be any worse than @Thrax going home with a 3D printed clone of his dong.

  • ThraxThrax Professional Shill, Watch Slut, Mumble Hivemind Drone Austin, TX

    Excuse me, I was talking about 3D scanning my favorite jell-o mode, you sick fuck.

    GHoosdum
  • AlexDeGruvenAlexDeGruven Wut? Meechigan

    Sure sure. Whatever makes you feel better.

    And yes, yes I am. But that really has no bearing on this part of the conversation.

  • mertesnmertesn I am Bobby Miller Yukon, OK

    Useful tools:
    FreeCAD
    Blender

  • MyrmidonMyrmidon Baron von Puttenham California

    You ever tried to use blender? Fuck blender.

    drasnor
  • ZanthianZanthian Mitey Worrier

    Would you be able to make this? http://www.thingiverse.com/thing:251118
    How do I know how long it should take?

  • d3k0yd3k0y Loveland, OH

    Those rings would be hard to do without a special plastic most likely, being so close in tolerance for them to "link" together, the material would probably fuse together during printing.

  • LeahVoiceLeahVoice Hobgoblin of Good Grooming Ferndale, MI

    How long do you think this would take? I'd like it in black.
    http://www.thingiverse.com/thing:347664

  • drasnordrasnor Starship Operator Hawthorne, CA

    You ever tried to use FreeCAD? Fuck FreeCAD.

    Myrmidon
  • mertesnmertesn I am Bobby Miller Yukon, OK

    @Myrmidon said:
    You ever tried to use blender? Fuck blender.
    @drasnor said:
    You ever tried to use FreeCAD? Fuck FreeCAD.

    Have you ever paid for the pro tools? Fuck the pro tools.

  • BobbyDigiBobbyDigi ? R U #Hats ! SoCal

    You ever got caught by the Police?

    -Digi

  • RyanFodderRyanFodder Detroit, MI

    @Zanthian said:
    Would you be able to make this? http://www.thingiverse.com/thing:251118
    How do I know how long it should take?

    I can make that. ~ 2 hrs would be my estimate.

  • RyanFodderRyanFodder Detroit, MI

    @LeahVoice said:
    How long do you think this would take? I'd like it in black.
    http://www.thingiverse.com/thing:347664

    Can you give me an internal diameter size (measure another bracelet?)

    I think that one would probably be about 3-4 hrs, would have to slice it with some detail to get it to look nice.

  • RyanFodderRyanFodder Detroit, MI

    @BobbyDigi said:
    You ever got caught by the Police?

    -Digi

    Friend of mine got caught with a Pro/E license. They coerced him in to buying ~ 5 licenses.

  • RyanFodderRyanFodder Detroit, MI

    @d3k0y said:
    Those rings would be hard to do without a special plastic most likely, being so close in tolerance for them to "link" together, the material would probably fuse together during printing.

    If they do fuse, you can get an exacto knife to clean it up. It won't be very bad with ABS.

  • LeahVoiceLeahVoice Hobgoblin of Good Grooming Ferndale, MI

    @CannonFodder said:
    I think that one would probably be about 3-4 hrs, would have to slice it with some detail to get it to look nice.

    I just measured some of my other bangle bracelets and they all measure about 3.75 in. (interior diameter). I'll see if I can find anything that's a little less detailed. Thanks!

  • MyrmidonMyrmidon Baron von Puttenham California

    @CannonFodder said:
    If they do fuse, you can get an exacto knife to clean it up. It won't be very bad with ABS.

    :O

    But fusion requires overcoming some of the strongest forces in the universe! How could you possibly hope to stand against that as a mere man?!

  • AlexDeGruvenAlexDeGruven Wut? Meechigan

    Never underestimate the power of a skillfully wielded X-Acto knife.

  • ZanthianZanthian Mitey Worrier

    Use The sword of Exact-Zero!

    ErrorNullTurnipLeahVoice
  • RyanFodderRyanFodder Detroit, MI

    @LeahVoice said:
    I just measured some of my other bangle bracelets and they all measure about 3.75 in. (interior diameter). I'll see if I can find anything that's a little less detailed. Thanks!

    I think I can get that to work as is :D

Sign In or Register to comment.