Tech Tip: $5 VGA Cooler

Comments

1. 
   1 Nov 2004 ~ 12:30am Thrax Ghetto Hardware v2.
2. 
   1 Nov 2004 ~ 12:36am Geeky1 That is soooooooo not ghetto. If it were cardboard, it'd be ghetto. Either way, it's sweet.
3. 
   1 Nov 2004 ~ 1:27am Shorty ahahaha.. wicked
4. 
   1 Nov 2004 ~ 7:29am Unregistered what about the ram on the other side of the board
5. 
   1 Nov 2004 ~ 9:11am primesuspect Totally sweet, Doug.
   
   /me gets out a fiver and heads to Home Depot
6. 
   1 Nov 2004 ~ 10:09am MediaMan

   Unregistered wrote:

   what about the ram on the other side of the board

   
   
   Give me another Sunday afternoon and I'll have that figured out for you. I still have plexi left over and another fan. Modding supposed to be fun...especially for 5 bucks.
7. 
   1 Nov 2004 ~ 11:37am Unregistered Why not just get an old pci card that you don't need, cut a hole in it and mount
   your fan?
8. 
   1 Nov 2004 ~ 12:36pm CyrixInstead Good guide!!
   
   ~Cyrix
9. 
   1 Nov 2004 ~ 12:46pm Shorty

   Unregistered wrote:

   Why not just get an old pci card that you don't need, cut a hole in it and mount
   your fan?

   But where is the fun in that
10. 
    1 Nov 2004 ~ 4:24pm Unregistered what if you had it suck cold air from the pci slot and vent the hot air up using the fan. It seems like it would be much more efficient to pull the hot air up then to force it out the back of the case.
11. 
    1 Nov 2004 ~ 4:27pm Thrax It's not so much about creating a turbulent airflow over the GPU, it's more about removing the dead air pockets that reside over almost the entire PCI/AGP region. It's just the way most ATX cases work. Even if no "Cool air" is being drawn in, there's still tremendous benefit from circulating the warm air away from the GPU.
12. 
    1 Nov 2004 ~ 4:27pm MediaMan Now this is what it's all about. Now you're thinking like a modder. I suggest heading down to the nearest Home Depot, pick up that 3 buck 8x10 sheet of plexi and create one on your own.
    
    I know that I'm going to revise my simple mockup to see if I can get more elaborate and keep it under $5. Glad the article got you thinking!
    
    
13. 
    2 Nov 2004 ~ 4:22pm Unregistered Just super glue some fans on both sides of the card!
14. 
    2 Nov 2004 ~ 6:12pm Geeky1 Doesn't cyanoacrylate do nasty things to solder masks?
15. 
    2 Nov 2004 ~ 7:00pm Medlock

    Geeky1 wrote:

    Doesn't cyanoacrylate do nasty things to solder masks?

    .........
    
    I really should learn to expect these things. :shakehead
    
    Let's see. dictionary.com says... "An adhesive substance with an acrylate base that is used in industry and medicine."
    
    Do hospitals use super glue?
16. 
    2 Nov 2004 ~ 8:28pm MediaMan Plastic...plexi...glue worked the same way in either case. If Geeky starts quoting off chemical equations I think he's been sniffing the glue instead.
17. 
    2 Nov 2004 ~ 8:31pm Geeky1 That's contact cement tho. Which I don't think is cyanoacrylate. But then maybe they call super glue "contact cement" up there.
    
    What I wanna know is what superglue does to solder masks. For some strange reason, I seem to remember reading or hearing somewhere or something that they don't get along well.
18. 
    2 Nov 2004 ~ 8:53pm MediaMan I think what Geeky's getting at is "will the fumes from 'super glue' (cyanoacrylate) break down the solder or PCB material?"
    
    Have I got that correct?
    
    A CSI Miami trick is that super glue fumes will adhere to surface areas such and can reveal fingerprints. Place the object in a sealed space with an open amount of super glue..wait...fingerprints will be revealed.
    
    In a PC there is constant air movement. The super glue will have dried thus no fumes. To the best of my knowledge there will be no harm. I have read nothing about the dangers of cyanoacrylate around solder masks.
19. 
    2 Nov 2004 ~ 8:58pm Geeky1 Almost, but I'm not talking about the fumes. You ever left a nasty solvent like Goof Off on say, ABS plastic before?
    
    It does things. Very Bad things. Like melting the plastic. Cyanoacrylate (or superglue, whichever you prefer) is not a nice cocktail of chemicals. I was simply wondering whether putting superglue on a PCB would cause any harm to the PCB while it's drying.
    
    For some reason, i seem to remember that the two don't mix very well. Oh well. Maybe my memory is just going. (Don't say it Prime, I'm downloading it now... )
    
    Oh, and that thing on CSI isn't just a movie trick.
20. 
    2 Nov 2004 ~ 9:22pm MediaMan

    Geeky1 wrote:

    Maybe my memory is just going. (Don't say it Prime, I'm downloading it now... )

    
    
    20 second "huh? time before I got that one. Varrrry good....Varrrrrry good.
21. 
    28 Dec 2004 ~ 3:06am Unregistered why not use Epoxy?
22. 
    28 Dec 2004 ~ 9:16pm shwaip

    Unregistered wrote:

    why not use Epoxy?

    
    hard to take off if you want to switch cooling systems...and depending on how large the heatsink you attach is, you may rip the gpu off the card.
23. 
    7 Jan 2005 ~ 4:23pm RADA OFF TOPIC ALERT!!!
    

    TheGr81 wrote:

    .........
    
    
    Do hospitals use super glue?

    
    They sure do Gr8. They use a milder form of "super glue" in place of stitches all the time.
    
    1. Seals wound against infection
    
    2. Less scarring that stitches.
24. 
    14 Sep 2005 ~ 2:41pm Sledgehammer70 dude this gives me ideas for a new cooling soultion
25. 
    24 Nov 2008 ~ 10:26pm Smoochee Well instead of leaving that slot open why dont you glue the plexi to the piece of metal that slides into the slot. It would help hold it in place,
26. 
    24 Nov 2008 ~ 11:12pm Sonorous 3 years later? lolwut?